XD100xe M290 Defibrillator Machine Parts Electric Shock Handle Energy Charging Switch Key Board Assembly Trigger

PRIMEDIC DefiMonitor XD100xe(M290) Defibrillator Electric Shock Handle Energy Charging Switch Key Board Assembly Trigger button MET905-1

► Brief Introduction

Press the trigger button or the two paddle buttons simultaneously to enable defibrillation, which is carried out immediately after the button is pressed. Hold the button pressed until the shock has been administered. Avoid contact with the jacks on the device during defibrillation.

If the charge is loaded via the charge button on the device, the shock can only be administered via the SavePads Connect. If the charge is loaded via the paddle buttons, the shock can only be administered via the paddles.

Alternatively, you can trigger internal discharge by pressing the charge button on the membrane keyboard again. An internal safety discharge is performed. Then select the correct energy level and press the charge button again.

► Charge Energy

• The selected energy is loaded by pressing the energy charge key and is ready for operation to provide a defibrillation after a short time. Ensure that the energy level you have selected is shown in the display.
• If the energy is transmitted via the SavePads and if charging is completed, the green activation key lights up and a warning signal is also given.
• If the energy is transmitted via the paddles, a warning sound is given.
• If a wrong energy level is selected and if the energy for defibrillation was already charged, discharge by pressing on the charge key on the film keyboard again. The charged energy will internally be safety discharged. Choose the new energy level and press the manual charge button again. A charged energy can not be corrected.
• If the capacitor is charged internally, energy required for a defibrillation pulse for 15 seconds is available and is indicated by a continuous tone and the ‘green’ trigger button. The time left is shown on the monitor. If defibrillation is not carried out within this time, a safety discharge takes place internally. By pressing the manual charge button within the 15 seconds again the energy can also be safety discharged internally

► Specification

► Packing Instructions

In order to ensure that the goods are delivered to customers in good condition, we will carefully and patiently pack the products. Please rest assured that we will use high-quality packaging materials to pack the goods to avoid being scratched or impacted during transportation. Generally speaking, there is no problem with the goods you receive. But if you find any problems with the goods during transportation, please contact us as soon as possible. But please pay special attention, if the problem is not caused by transportation, it is another matter. In short, after careful inspection by our engineers and our careful packaging, the goods will eventually arrive in your hands intact.

Please kindly contact us, if you are interested in PRIMEDIC DefiMonitor XD100xe(M290) Defibrillator Electric Shock Handle Energy Charging Switch Key Board Assembly Trigger button MET905-1, Thank you!