GE B30 Patient Monitor Keypad Membrane PN M1002328 EN Compatible New

product features:

This keyboard film is suitable for GE B30 monitor machines. Do not let liquid enter the key film. Do not let any liquid stay on the surface of the device. Absolutely do not use abrasive materials and bleach. It is recommended to use a clean cloth. When cleaning the outer surface, cut off the power supply of the monitor first if possible. You can use 70% ethanol or neutral soapy water to clean the outer surface. Do not use strong solvents  trichlorethylene; use a soft cloth to clean the outer surface, especially the screen. .

Product advantages:

☑Chemical, abrasion and scratch-resistant front panel
☑Button letterpress printing
☑Sturdy plastic housing
☑Integrated 38mm trackball
☑Resistant to dirt, dust and liquids (IP65)
☑CE, FCC certification
☑Short travel key

function test:

Check the equipment and accessories by performing the following functional tests monthly. Check for cleanliness and physical damage; check cables and wires. Determine if there is physical damage. After connecting the monitor, pull the patient cable to confirm whether there is an intermittent fault;

how to install:

1. Compare the distance between each hole in the gold moon plate. Fix the emblem-shaped switch on the printing plate, and connect the connecting wire according to the corresponding connecting point of each switch. At the same time, according to the actual space between the metal plate and the display board, leave the corresponding printing plate edge to fix the switch board. Since the new switch board is between the metal plate and the indicator light display board, the printing plate must also have holes corresponding to the indicator light position 2 of the display board. This is to ensure that the luminous tube of the display board passes through the printed board and the display signal can be seen from the panel. There must be a certain distance between the line and the two boards to prevent short circuit;
2. Embed the printed switch board in the small hole corresponding to the metal plate of each button switch, so that the top of the button column is parallel to the metal plate surface. If it is too high beyond the plate surface, the outer layer After the panel film is restored, the switch will be pressed down and cannot be used. If it is too low, the switch will not be in place and will not work when pressed by hand. After embedding the broken switch plate, use a rubber pad to flatten it before use. The left glue is attached to the metal plate, and finally the outer protective film of the panel is restored to its original position. The modification process is completed. The modified switch plate has a very good operating feel. . There is a clear shrapnel sound when the keys are pressed, giving people a very intuitive on-off feeling. It has a long service life, high reliability and easy maintenance. If there is a problem with a certain switch during use, you can directly judge and replace it by the sound of the shrapnel of the membrane switch button.

Quick Detail: