China World Technology Medical Equipment Service Group
Win-win together!
 |
| Brand Name: | Covidien |
| Model Number: | Puritan Bennett 980 |
| Minimum Order Quantity: | 1 |
|---|---|
| Delivery Time: | 3-5 working days |
| Payment Terms: | T/T, Western Union，PayPal |
| Product Name: | Covidien | Type: | Puritan Bennett 980 |
|---|---|---|---|
| Application: | Medical Equipment,ICU,hospital Device | Warranty: | 90days |
| Temperature Range Operating: | 10°C To 40°C (50°F To 104°F) | Temperature Range Storage: | -20°C To 70°C (-4 °F To 158°F) |
| Atmospheric Pressure Operating: | 70 KPa To 106 KPa (10.15 Psi To 15.37 Psi) | Atmospheric Pressure Storage: | 50 KPa To 106 KPa (7.25 Psi To 15.37 Psi) |
| Altitude Range Operating: | -411.5 M To 3,048 M (-1,350 Ft To 10,000 Ft) | Altitude Range Storage: | 6,096 M Max (20,000 Ft Max) |
| High Light: | 10086042 Rechargeable Lithium Ion Battery,71MR1865-3 Lithium Ion Battery |
||
Covidien Rechargeable Lithium Ion Battery 10086042 71MR1865-3 for Covidien Puritan Bennett 980 PB980 Ventilator Accessories 25.9V
► Brief Introduction
The ventilator’s primary battery is located in the rearward battery receptacle on the right side of the BDU. The compressor’s primary battery is located in the rearward battery receptacle in the compressor base.The primary battery may be “hot swapped,” that is it can be replaced while the ventilator is operating.
► To install or replace the primary battery in the BDU or compressor
1. With the battery not installed in the ventilator, or if the ventilator is turned off and not connected to AC power, check the charge level by pressing the charge level button on the battery and verifying the charge level LEDs illuminate.For the location of the charge level button. Five green LED segments illuminate, indicating ≥ 90% battery capacity. From bottom to top, the first LED indicates ≥ 10% capacity, the second LED indicates ≥ 25% capacity, the third LED indicates ≥ 50% capacity, and the fourth LED indicates ≥ 75% capacity. An illuminated red LED at the top of the battery indicates a battery fault. If no LEDs illuminate it means there is < 10% battery capacity remaining.
2. If the charge level is sufficient, orient the battery face the front of the ventilator and locate the battery compartments on the right side of the appropriate module. The receptacle towards the rear of the ventilator houses the primary battery while the receptacle towards the front of the ventilator houses the extended battery.
3. The primary battery is fastened in place with a thumbscrew. Loosen the thumbscrew approximately four to five turns to allow battery installation.
4. Insert the battery and push into its receptacle all the way until it clicks, indicating it is latched. The battery will only fit into the slot one way.
5. Tighten the thumbscrew to secure the battery and prevent the primary battery from being removed.
► Battery Testing
Push the battery charge level button located on the battery. A series of LEDs illuminates, indicating the charge level of the battery. When the bottom LED is illuminated, there is ≥ 10% of full battery capacity. The next LED illuminates when there is ≥ 25% capacity. the third lamp illuminates when there is ≥ 50% capacity available. The fourth LED illuminates when there is ≥ 75% capacity, and when the top LED is illuminated, it represents ≥ 90% capacity.
► Overview
| 1 | White battery in-use LED |
| 2 | Red battery fault indicator |
| 3 | Green charge status LEDs |
| 4 | Charge level button |
Thank you for your time! If you are interested in Covidien Rechargeable Lithium Ion Battery 10086042 71MR1865-3 for Covidien Puritan Bennett 980 PB980 Ventilator , please let us know. Welcome to place your orders.
Thank you for your time and interest.
Contact Person: Rita
Tel: 8618279091952
