Philip FM20 Fetal Monitor Display T-5175GD065J-LW-BHN Philip FM20 Fetal Monitor Display Parts

Name: Philip FM20 Fetal Monitor Display T-5175GD065J-LW-BHN Philip FM20 Fetal Monitor Display Parts
Brand: Philip
SKU: T-5175GD065J-LW-BHN
Rating: 4.5 (186 reviews)

Product Details:

Brand Name:	Philip
Model Number:	T-5175GD065J-LW-BHN

Payment & Shipping Terms:

Minimum Order Quantity:	1
Delivery Time:	5-8 work days
Payment Terms:	T/T(wire transfer), Western Union, Paypal

Contact Now

Detailed Product Description

BRAND:	Philip	PRODUCT NAME:	Fetal Monitor Display
WARRANTY:	90 Days	CONDITION:	In Good Working Order
MATERIAL:	Glass/Plastic/Metal	COLOR:	Black
MOQ:	One Piece	IN STOCK:	Yes
MODEL:	T-5175GD065J-LW-BHN	ADVANTAGE:	Original
TYPE:	Fetal Monitor	FUNCTIONALITY:	Good
APPLICATION:	Philip FM20 Fetal Monitor	MACHINE TYPE:	Monitor
PAYMENT TERMS:	T/T(wire Transfer), Western Union, Paypal	SERVE:	Direct Sales, Exchanges, Repairs
High Light:	Philip FM20 Fetal Monitor Display , Fetal Monitor Display , T-5175GD065J-LW-BHN Fetal Monitor Display

Philip FM20 Fetal Monitor Display T-5175GD065J-LW-BHN

Philip FM20 Fetal Monitor Display T-5175GD065J-LW-BHN Brief Introduction

This Philip FM20 Fetal Monitor Display T-5175GD065J-LW-BHN is an accessory for Philip FM20 Fetal Monitor. The display screen is particularly important for the entire monitor. Its main function is to display the fetal heart rate, uterine contractions, fetal movement chart, mother’s non-invasive blood pressure, mother’s heart rate, etc. The size of this display is 6.5 inches, made of glass, waterproof, lightweight, and easy to clean.

Feature

The advantage of this display is the TFT color display, which can be tilted, has a wide viewing angle, and large fonts so that doctors can quickly see the data on it and diagnose and treat patients in a timely manner. If the display screen appears black, does not display, or the display screen is damaged due to a fall, the display screen must be replaced with a new one in time. If the display screen is not replaced with a new one, the device will not be able to function normally. You also need to be careful when disassembling the display. To remove the display assembly: remove the top cover assembly, place the top cover assembly top down on a cloth or other soft surface, first move the cable lock in the direction of the arrow to release the cable lock. Then unplug the white logger ribbon cable from the logger adapter board. Next, after releasing the cable lock, disconnect the silver display ribbon cable from the recorder adapter board, flip over the top cover assembly, remove the two plastic hinge pins on either side of the display housing, and use a small flat head screwdriver to reverse the Turn the slotted head clockwise to loosen it, squeeze the arms of the ratchet clamp to remove it from the slot on the rear of the monitor housing and top cover, and finally gently pull the display ribbon cable through the cable guide and remove After removing the display part, you have completed all the steps to remove the display. During the process of disassembling the display, you must be careful and gentle to prevent damage to other parts due to excessive force.

Replacing the display assembly is the reverse of the removal process.

Steps to replace the display screen	With the top-cover assembly facing up, route the display ribbon cable through the cable guide in the top-cover assembly.
	Carefully flip the top-cover assembly over the display assembly.
	Gently pull the display ribbon cable completely through the cable guide.
	Reconnect the display ribbon cable to the logger adapter board, making sure the cable lock is secure after installation.
	Reconnect the white logger ribbon cable to the logger adapter board, making sure the cable lock is secure after installation.
	Reinstall the plastic hinge pin. Do not use excessive force when reinstalling the hinge pin. Use a small screwdriver to gently turn the head of the hinge pin. You can feel that when the pin is seated correctly, the head should be flush with the surface and the slot in the pin head should be pointing in the same plane as the side of the monitor assembly housing.
	Reinstall the ratchet clips into the slots on the rear of the monitor housing and top cover, removing the program.