Send Message
Tel:
China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group

China World Technology Medical Equipment Service Group

Win-win together!

Home ProductsPatient Monitor Parts

Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition

Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition

  • Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition
  • Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition
  • Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition
  • Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition
Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition
Product Details:
Brand Name: Mindray
Model Number: D6
Payment & Shipping Terms:
Minimum Order Quantity: 1
Delivery Time: 3-5 working days
Payment Terms: T/T, Western Union,PayPal
Contact Now
Detailed Product Description
Product Name: Mindary Type: D6
Application: Medical Equipment,ICU,hospital Device Warranty: 90days
MEANS OF TRANSPORT: Air Express MOQ: 1unit
Screen Diagonal: 8.4 Inches Active Area (H X V): 170.4(H) X127.8(V)mm
Number Of Pixels (H X V): 800x 600 Inventory Status: Sufficient Stock
Pixel Pitch (H X V): 0.213 X 0.213 Mm Product Peculiarity: Professional, Reliable,Economic
High Light:

Good Mindray D6 Defibrillator Display

,

M084GNS1 R1 Mindray D6 Defibrillator Display

 

Mindray D6 Defibrillator Display M084GNS1 R1

 

 

 

Brief Introduction

The M084GNS1 R1 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driver circuit and a backlight system. This TFT LCD has a 8.4 inch diagonally measured active display area with SVGA resolution (800 horizontal by 600 vertical pixels array)

 

 

Features

■ Supported SVGA Resolution

■ LVDS Interface

■ Compatible with RoHS Standard

 

 

► Handling Precaution

(1) Please mount LCD module by using mounting holes arranged in four corners tightly.

(2) Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. IVO does not warrant the module, if customers disassemble or modify the module.

(3) If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. If liquid crystal contacts mouth or eyes, rinse out with water immediately. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.

(4) Disconnect power supply before handling LCD module.

(5) Refrain from strong mechanical shock and /or any force to the module.

(6) Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts parameters, environmental temperature; etc otherwise LCD module may be damaged. It’s recommended employing protection circuit for power supply.

(7) Do not touch, push or rub the polarizer with anything harder than HB pencil lead. Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly.

(8) When the surface is dusty, please wipe gently with absorbent cotton or other soft material. When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzene or other adequate solvent.

(9) Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading.

(10) Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence.

(11) Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge, please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods.

(12) Do not adjust the variable resistor located on the module.

 

 

► Specification

Screen Diagonal 8.4 inches
Active Area (H x V) 170.4(H) x127.8(V)mm
Number of Pixels (H x V) 800x 600
Pixel Pitch (H x V) 0.213 x 0.213 mm
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance (350) (Typ.) cd /m2
Contrast Ratio (600) (Typ.)
Response Time (16) (Typ.)
Input Voltage 3.3 (Typ.)
Weight (200)(Typ)
Support Color 262 K/16.7 M
NTSC (45) (Typ.)
Viewing Direction 12 O’clock
Outline Dimension (H x V x D) (203. 0) (Typ.) x (142.5) (Typ.) x (5.7) (Typ.)

Hospital Medical Equipment Parts Mindray D6 Defibrillator Display M084GNS1 R1 In Good Working Condition 0

 


 

Thank you for your time! If you are interested in Mindray D6 Defibrillator Display M084GNS1 R1, welcome to place your orders. Early order early shipment! If you have any questions, please feel free to contact us at any time, we are glad to answer them.

 

Contact Details
China World Technology Medical Equipment Service Group

Contact Person: Rita

Tel: 8618279091952

Send your inquiry directly to us
China World Technology Medical Equipment Service Group
TianHe District,GuangZhou,GuangDong
Tel:86-198-5481-5217
Mobile Site Privacy Policy | China Good Quality Used Patient Monitor Supplier. © 2021 - 2024 patients-monitor.com. All Rights Reserved.