Edan 5 Lead Snap AHA Reusable ECG Cable REF EL05DASY For Edan IT20 Telemetry Ransmitter

Edan 5 lead Snap AHA Reusable ECG Cable REF EL05DASY 02.04.241961 for Edan iT20 Telemetry Transmitter

► Brief Introduction

When accessory is not compatible, the screen will display “Check the ECG accessories”; When compatible and ECG module is active, telemetry transmitter will check ECG leads connection. The screen will enter into main interface under condition of correct leads connection. Under leads off or wrong connection, the screen will display ECG leads connection sketch in which wrongleads position and correct leads position will be indicated. ECG leads connection sketch will disappear in these conditions, leads connection restoring normally, pressing shifting key or over 60 seconds.

► Connecting ECG Cables

• Attach clip or snap to electrodes prior to placement.
• Put the electrodes on the patient. Before attaching, apply some conductive jelly on the electrodes if the electrodes are not electrolyte self-supplied.
• Connect the electrode lead to the patient's cable.
• Plug the patient cable into the ECG connector.

► Electrode Placement for 5-lead

Take the American standard for example; see the following figure:

■ RA placement: directly below the clavicle and near the right shoulder.

■ LA placement: directly below the clavicle and near the left shoulder.

■ RL placement: on the right hypogastrium.

■ LL placement: on the left hypogastrium.

■ V placement: on the chest, the position depends on your required lead selection

► Cleaning the ECG Cable Assembly

Wipe the cable assembly with a soft cloth dampened with the cleaning solution until no visible contaminants remain.

Wipe off the cleaning solution with a fresh cloth or towel, dampened with tap water after cleaning until no visible cleaning agent remains..

Wipe off with a dry cloth to remove residual moisture.

Leave the cable assembly to air dry

► Specification

► About Company

We cater to all biomedical facility needs - service, repair, rental, and purchase and sale of equipment. Safe, reliable and compliant medical device services are our primary goals. We pride ourselves on the individualized attention we provide each client, catering to all aspects of their biomedical facility. Our team of experienced biomedical technicians are trained, certified and equipped with the latest technology and tools to repair and maintain a wide variety of patient care and diagnostic equipment.

Our technicians ensure that all equipment leaving our warehouse is meticulously tested and certified for safety and compliance. We understand the importance of device safety and performance in today's healthcare environment. Providing the most professional customer service and adhering to the highest quality standards is our mission.

Thank you for your time! If you are interested in Edan 5 lead Snap AHA reusable ECG cable REF EL05DASY for Edan iT20 Telemetry ransmitter, welcome to place your orders. Early order early shipment! 

Looking forward to receiving your early inquiry.