Mindray VS600 Patient Monitor Main Board 051-001363-00 with 100 V ~ 240 V AC Input and 50/60Hz Frequency Supported by Technical Engineers with 12 Years of Experience

The main board serves as the control center of the equipment, providing essential communication and display functions including:

• Communication with SpO2 board and NIBP module via serial ports for parameter measurement and result reading
• Communication with Predictive/IR (Infrared Radiation) Temp module through serial ports
• Communication with power management board through serial ports
• RS232 serial port extension
• Segment-code LCD display control via I2C
• Backlight drive for segment-code display
• Keypad action recognition and response
• Beeper control through IO port
• 24-hour timing via internal RTC

1. Stand the monitor and carefully separate the front housing assembly from the rear housing assembly. Disconnect the cable between the main board and power management board, then remove the front panel.

2. Disconnect the cable between the main board and keypad board. Remove the four M3×6 screws and extract the main board.

• Verify environment and power supply meet requirements
• Inspect equipment and accessories for mechanical damage
• Check all power cords for damage with intact insulation
• Ensure only specified accessories are used
• Confirm battery meets performance requirements
• Verify monitor is in good working condition

We are an established medical equipment supplier with extensive industry experience in product distribution and customer service. Our commitment to quality and customer satisfaction ensures you receive reliable products and support.

We specialize in parts, accessories, and equipment for various medical manufacturers including:

• GE
• Philips
• Mindray
• Goldway
• Nihon Kohden
• Medtronic
• Masima
• Drager
• Edan
• Zoll