M2705-26411 FM20 Fetal Monitor Motherboard Mainboard CPU Board P/N M2705-66411

P/N M2705-66411 M2705-26411 Philipilip FM20 Fetal Monitor Mainboard motherboard CPU Board

P/N M2705-66411 M2705-26411 Philipilip FM20 Fetal Monitor Mainboard

Philipilip FM20 Fetal monitor mainboard M2705-66411 M2705-26411

Monitor Hardware Overview

The monitor consists of nine main functional components:

• Power supply M2703-60001

• Connector Block (1253-8415)

• Bus Master Board (M2703-66460)

• Main CPU Board (M2703-66450)

• Fetal Recorder (Thermal Printer Unit)

• Display Assembly (M2703-64503)

• Noninvasive Blood Pressure Board (optional, M2703-64502)

• SpO2 Board (optional, M2703-66453)

• Input /Output Interface Boards (optional): – LAN / RS232 (M2703-67501) – Dual PS/2 (M8086-67501)

Main CPU Board

The main CPU board controls the interface of the monitor and is responsible for the final processing of data from the main bus board. It sends this data to a TFT screen and a thermal printer to record waveforms and other patient data. See more at Optional LAN / RS232 and PS / 2 intermediate cards

Power supply

The power supply is a multi-input, 24V output switching device housed in a small package assembly.

Connector Block

Connectors on the terminal block allow connection of fetal transducers, patient modules, or remote event markers to the monitor in any configuration. The terminal block is located on the main bus card and can be replaced.

Bus Master Board

The transducer or sensor signal is routed from the sensor connector on the connector board (M2703-66421) to the main bus board (M2703-66420). It communicates with transmitters connected via a CAN bus and transmits parameter data via a serial connection to the CPU motherboard for further processing and display.

Removing the CPU Motherboard

To remove the main CPU board, do the following:

1. Remove the top cover.

2. Remove the screw that secures the metal cover.+

3. Remove the armor

4.Disconnect the speaker cable (1), power cable (2), master card bus cable (3), and non-invasive blood pressure cable (4) from the CPU base board.

5 .Remove the motherboard from the CPU by lifting it up.

Replace the cpu motherboard

The CPU motherboard replacement procedure reverses the removal procedure. Make sure all cables are connected properly.

FAQ :

• .Can you help ship to my forwarder ?

Sure ,it will be better .If no forwarder in China ,we will help you ship

• Do you have Aliexpress or ebay shop ?

Right now we don’t have .In the future ,we will do it .

• How long is your warranty ?

We offer 90 days warranty .

• May i have your products list ?

Right now we don’t have product list .Is it possible to check our website ?

If you're interested in M2705-26411 FM20 Fetal Monitor Motherboard Mainboard CPU Board P/N M2705-66411 ,feel free to contact us .Thank you .