China World Technology Medical Equipment Service Group
|Place of Origin:
|Minimum Order Quantity:
|3-5 working days
|T/T(wire transfer), Western Union, Paypal
|Mindray IMEC7 Patient Monitor With ECG, RESP, NIBP, SpO2, PR, TEMP Parameters
|ECG, RESP, NIBP, SpO2, PR, TEMP
Mindray IMEC7 Patient Monitor,
SpO2 Patient Monitor,
ECG NIBP Patient Monitor
Mindray IMEC7 Patient Monitor With ECG, RESP, NIBP, SpO2, PR, TEMP Parameters
Mindray iMEC 7 patient monitor product introduction:
Standard configuration parameters: ECG, RESP, NIBP, SpO2, PR, TEMP
Powerful software function
IMEC 7 has a flexible display interface, powerful data storage function, convenient data export function, and quick clinical configuration settings
Large font display interfaceDynamic short trend Respiration oxygenation diagram
A new touch experience
800X600 high-resolution TFT display, touch operation mode is more in line with the operating habits of medical staff, the operation is simpler and faster, saving time and effort
Thin and compact, streamlined design
Large capacity lithium battery
Large-capacity lithium battery ensures long-term battery life without power supply, eliminating traditional lead-acid batteries, and making the memory effect never return
Reliable and economical clinical assistant
12 inch touch TFT display
8-channel waveform display
New Mindray ECG and blood oxygen algorithm
ECG, RESP, NIBP, SpO2, PR, TEMP
1. Alarm light When a Philipilipysiological alarm or technical alarm occurs, this light will flash as defined below.
High level alarm: the indicator light flashes red quickly. u
Intermediate alarm: The indicator light flashes yellow slowly. u
Low liquid level alarm: the light is yellow and does not flash.
3. Power switch u
Press this switch to turn on the patient monitor. u
When the monitor is on, press and hold this switch to turn off the monitor. An indicator is built into this switch. It turns on when the patient monitor is turned on, and turns off when the patient monitor is turned off
4. AC power indicator
Lights up when AC power is connected.
5. Battery indicator
On: When the battery is installed and AC power is connected.
Off: When the battery is not installed or the installed battery is faulty, or the patient monitor is not connected to AC power when the patient monitor is turned off. Blinking: When the patient monitor is on battery power.
6. Press to reset the alarm.
7. Press to pause or resume the alarm.
8. Press to freeze or unfreeze the waveform.
9. Knob Rotate the knob clockwise or counterclockwise. Each time you click, the highlight jumps to the adjacent item. When you reach the desired item, press the knob to select it.
10. If there is no menu displayed on the screen, press it to enter the main menu. If a menu is displayed on the screen, pressing it will close the menu.
11. Press to start or stop recording.
12. Press to start or stop NIBP measurement.
11 Connector for IBP cable
If the patient monitor and other devices are used together, their equipotential ground terminals must be interconnected to eliminate the potential difference between them.
It emits a defibrillator synchronization signal, a nurse call signal, and an inference output signal. For iMEC15S / iMEC15 you can also connect the AG module.
It connects to an additional monitor which expands the display possibilities of the monitor. What is displayed on the second screen is similar to what is displayed on a monitor screen.
It connects the USB devices, such as a barcode scanner.
Contact Person: Kiara