E-PSMP-01 Patient Parameter Monitor Module For GE B450 B650 B850 Repair Parts

E-PSMP-01 Patient Parameter Monitor Module For GE B450 B650 B850 Repair Parts

Multi-parameter hemodynamics module

The multi-parameter module is capable of monitoring multiple parameters simultaneously, such as electrocardiogram, spO2 and NBP. Only one of these modules can be used simultaneously. The four main multiparameter hemodynamics modules include PRESTN, PSM, PDM and TRAM.

Other modules

There are many other parameter acquisition modules that interface to the nursing monitor B850.

E- modules: plug into the framework and provide extensive parameter acquisition capabilities.

Tram-Rac module: insert Tram-Rac, parameter capacity is limited. Most of them are single parameter

Multi-parameter hemodynamics module

E-modules

Tram-Rac module

PDM (patient information module)

The PDM processes patient data signals and sends them to monitors for display. Stores patient data for 24 hours with 1 minute resolution.

1. ECG / Imp. Respiration time

• T1-T2/CO
• P1-P4
• Remove the option card of the module
• Spo2
• NIBP
• Defib/Sync
• Dual function power on and zero all buttons
• Power indicator
• Communication indicator

PDM support:

• 3, 5, 6 or 10 lead ECG cable.
• SpO2-nerve cells or Masima
• NBP-Data Super Statistical Technology
• Two templates
• Cardiac output
• Up to 4 invasive pressures
• Respiratory function-I, II and abdominal RL-LL
• EK-Pro arrhythmia detection algorithm in arrhythmia treatment

1.NIBP

2.P1-P2

3.ECG /Imp. respiration

4. SpO2

5. 5.T1-T2

PSM also has a variant called PSMP, which supports invasive blood pressure measurement. There are direct action buttons on the module to start or stop blood pressure, start or stop automatic NIBP circulation and zero invasive pressure

PSMP support:

• 3, 5, 6 or 10 lead ECG cable

• SPO2-Ohmeda
• NIBP,
• two invasive blood pressure (with PSMP),

• two temperature

• EK-Pro arrhythmia detection algorithm-processing is done in the processing unit

Installing and removing modules

Install and remove the B850 module

warning

When connecting to PDM or TRAM, the loaded IP label may affect the channel label of other connected channels, which will also affect the alarm limit.

Install and remove the PSM to the frame

To install the PSM to the frame

1. Connect a module by aligning a module with the insertion guide on the outside of the frame.

2. Push the module into the frame until it clicks and stops

Remove PSM from the frame:

1. Pull down the release tab to retract the lock key and release the PSM from the frame.

2. Hold the PSM firmly and slide it off the frame guide

Other modules

PICCO module ,MPM moduel ,AG module ,M3001A module ,M3012A module ,M3014A module ,M3015A module ,M3016A module, E-mini C module , M1034B module,T series Co2 side stream module 115-043912-00,CO2 Module ,M1006B module,IBP module ,GE B20i patient monitor parameter module with IBP SPO2 ECG NIBP 2060241-001-3 etc

If you're interested in E-PSMP-01 Patient Parameter Monitor Module For GE B450 B650 B850 Repair Parts ,feel free to contact us .Thank you .