New Original Drager 8416203 Flow Sensor Sleeve Gray Silicone Ventilator Maintenance Accessory

New Original Drager 8416203 Flow Sensor Sleeve Gray Silicone Ventilator Maintenance Accessory

 
 
► Brief Introduction
 

This is a dedicated external mounting sleeve for neonatal flow sensors, designed for Drager's Babylog series ventilators. Used with neonatal flow sensors, it positions and holds the sensor while providing a seal and protection. It is a critical sealing and maintenance accessory for the ventilator's airway.

This sleeve is primarily made of gray medical-grade elastic silicone rubber, offering stable resilience. It is resistant to the heat, humidity, and moisture within the ventilator's airway, as well as common medical disinfection media, and is not prone to hardening or cracking. The material is anti-static, preventing electrostatic interference with the internal flow sensor element.

 
 
► Features

1. Fixed Flow Sensor Core

The flow sensor core is stably positioned within the ventilator's airway interface, preventing sensor displacement caused by continuous airflow impact and ensuring stable airflow through the sensing channel.

2. Leakage Prevention

The elastic silicone rubber fills the assembly gaps, preventing gas leakage from the sensor mounting location. Leakage will significantly deviate from the tidal volume calculated by the ventilator, interfering with neonatal ventilation parameter adjustments.

3. Vibration Buffering

Buffers vibrations generated during equipment operation and transport, reducing the risk of flow measurement drift and maintaining consistent flow monitoring accuracy.

4. Condensation Prevention

Prevents condensation from the breathing circuit from seeping into the sensor assembly gaps, reducing data fluctuations and equipment alarms caused by water accumulation.

5. Reusability

The elastic silicone rubber material allows for repeated disassembly and replacement of the disposable sensor core. The sheath does not need to be replaced with each sensor core, reducing long-term maintenance and consumable costs for the department.

► Parameters
 

 
 
► Product Picture
 

►FAQ
 

Q1: My ventilator keeps alarming with high flow rates, and replacing the sensor chip hasn't helped. Should I check this cover first?

A1: Yes, a faulty seal is a common cause. First check the cover's elasticity, surface for cracks, and whether it's installed correctly.

Q2: Can the cover be disassembled, cleaned, disinfected, and reused long-term?

A2: The cover is reusable. Short-term cleaning and disinfection are fine, but repeated high-temperature disinfection will accelerate silicone aging. We recommend checking the elasticity regularly; replace it immediately if hardening or cracks appear.

Q3: Is this 8416203 gray cover compatible with all Babylog neonatal ventilators?

A3: Yes, it's compatible with all Babylog VN500, 6000, and 8000 series neonatal ventilators. The entire machine has a standardized original airflow configuration, so it can be directly replaced.

90 Day Warranty                             SGS ceryification