Comen K1 Multi Parameter Patient Monitor With Rechargeable Battery & Docking Charging Base

Comen K1 Multi Parameter Patient Monitor With Rechargeable Battery & Docking Charging Base

 
 
► Brief Introduction
 

This is a portable patient monitor for transport, model K1. The monitor has a compact design, comes with a charging base, and weighs only 2.2KG. It also features an integrated handle, making it easy to hold with one hand, facilitating transport and saving space and effort.

The K1 monitor has a 7-inch touchscreen display, with no physical buttons or knobs, resulting in a more aesthetically pleasing and streamlined design. The back of the monitor has mounting holes for wall mounting/stands, supporting various installation methods such as boom jacks, IV stands, and transport stretcher brackets, flexibly adapting to emergency trolleys and ambulance scenarios.

 
 
► Features

1. Vital Signs Monitoring

The K1 monitor comes standard with ECG, RESP, NIBP , SpO2 , and PR ; it supports 3/5-lead ECG switching, automatic arrhythmia analysis, ST segment deviation monitoring, and can identify various common malignant arrhythmic events.

2. In-hospital transport

The main unit has a built-in high-capacity lithium battery, providing continuous monitoring for ≥6 hours on a full charge. With the charging dock, it can provide continuous power to the ward and also float charge the built-in battery. The main unit can be easily removed for emergency transport, making it versatile for both ward and transport purposes.

3. Comprehensive alarm management system

The device has audible and visual alarms, supporting over-limit alarms, lead detachment alarms, and low battery warnings. Alarm events are automatically timestamped and archived for easy clinical review of patient condition changes.

4. Trend and event data storage

Continuously stores vital sign trend charts for up to 24 hours, automatically recording key clinical events such as arrhythmias and blood pressure spikes. Interface playback is supported for review, assisting medical staff in assessing patient condition fluctuations.

5. Data output and networking

The K1 is equipped with a network port and a USB interface. With the optional built-in wireless module, it can connect to the hospital's central monitoring system for centralized viewing of hospital-wide monitoring data. Patient monitoring data can be exported to a USB flash drive.

► Parameters
 

 
 
► Product Picture
 


 

►FAQ
 

Q1: When transporting the Comen K1 main unit detached from its dock, what battery percentage is recommended for returning it to the charging dock?

A1: It is recommended to return the device to the charging base for recharging when the battery level is below 20%. The device will provide a continuous audible and visual low battery warning when the battery level drops below 10% to prevent unexpected power outages during transport.

Q2: Will leaving the device powered on for 24 hours a day while on the charging base accelerate the aging of the built-in battery?

A2: The base features intelligent float charging management, automatically cutting off the charging circuit once the battery is fully charged to prevent overcharging. If used in a fixed ward for extended periods, it is recommended to perform a full charge and discharge cycle every 1-2 months to maintain battery activity.

Q3: The monitoring screen frequently turns off automatically. Where can I adjust the screen's on/off time?

A3: The backlight standby time can be adjusted in the System Settings - Display menu, supporting settings from 5 minutes to permanent on/off. For transport scenarios, it is recommended to appropriately shorten the backlight time to extend battery life.

90 Day Warranty                             SGS ceryification