Red LNC-04 LNCS 20-pin SpO2 Patient Cable 4 ft REF 2055 New Original Medical Accessories

Red LNC-04 LNCS 20-pin SpO2 Patient Cable, 4 ft REF 2055 new original

► Brief Description

The Red LNC-04 LNCS SpO2 Patient Cable is a 20-pin SpO2 patient cable. Designed specifically for pulse oximetry devices, it establishes a reliable and stable signal transmission channel between the sensor and the monitor, ensuring the continuity and accuracy of SpO2 monitoring. It is gray in color, made of TPU material, making it very strong and durable. The cable has a certain degree of flexibility, allowing it to be bent and folded without easily deforming or cracking. Its 4-foot (approximately 1.22-meter) length allows patients to move within a certain range without affecting the accuracy of the monitoring data.

► Specifications

►Detailed Photos

►Key Features

1.Secure 20-pin Connection: The cable features a 20-pin red connector, ensuring a secure electrical connection with the device and minimizing the risk of signal loss or interference.

2.Suitable 4-foot Length: The 4-foot (approximately 1.2-meter) length provides ample flexibility for clinical operation. Healthcare professionals can freely arrange the cable according to patient positioning and monitoring equipment location, avoiding both excessive length and tangling.

3.Reusable and Durable: Constructed from medical-grade materials, this cable can withstand repeated use in clinical environments. The TPU material combines flexibility and abrasion resistance, and the 4.0 mm diameter design ensures strength while maintaining good bending performance.

4.LNCS Sensor Compatibility: The LNCS (Low Noise Wired Sensor) series is designed with the connector located away from the sensor application area, improving patient comfort while ensuring excellent SpO2 monitoring performance. The Red LNC-04 cable can connect to any LNCS sensor.

►Operating Procedures

1.Connecting the Device: Insert the device connector (20-pin red connector) of the patient cable into the corresponding SpO2 port on the monitor or pulse oximeter module, ensuring a full engagement.

2.Connecting the Sensor: Align the connector of the LNCS series sensor with the cable interface.

Push them together firmly until fully engaged.

Close the transparent plastic protective cover on the cable connector to lock the sensor in place.

After connection, gently pull the cable connector (not the cable itself) to confirm a secure connection.

►Precautions

1.Proper Insertion and Removal: When connecting or disconnecting either end of the cable, always hold the connector itself, not pull the cable directly, to prevent damage.

2.Pre-Use Inspection: Before use, visually inspect the cable to ensure it is physically intact, without cracks, wear, or signs of aging.

If you urgently need to replace the Red LNC-04 LNCS 20-pin SpO2 Patient Cable REF 2055 , please send me an inquiry and I will give you a quote immediately. I look forward to hearing from you.