MX450 Patient Monitor LCD Display 12 Inch NL12880BC20-05 New Original Spare Part

MX450 Patient Monitor LCD Display 12 inch NL12880BC20-05 new original

► Brief Description

The MX450 Patient Monitor LCD Display is a 12-inch, gray-colored LCD monitor weighing approximately 0.5 kg. It features a resolution of 1280×800 and an aspect ratio of 16:10. Utilizing UA-SFT technology, the liquid crystal molecules align parallel to the panel surface, achieving a symmetrical ultra-wide viewing angle of 88° horizontally and vertically. In medical monitoring scenarios, doctors and nurses can clearly view patient waveforms and data from different angles without needing to look directly at the screen. This full-viewing-angle feature ensures that every medical staff member receives consistent and accurate visual information during collaborative ward rounds.

► Specifications

►Detailed Photos

►Features

1.A brightness of 450 cd/m² and a contrast ratio of 1000:1 ensure clear display under various lighting conditions. Combined with the MX450 monitor's built-in ambient light sensor, the screen brightness automatically adjusts, maintaining optimal readability in both bright ICU rooms and dimly lit hospital wards at night.

2.A wide operating temperature range of -20°C to +70°C allows the display to adapt to various medical environments. A 70,000-hour LED backlight lifespan significantly reduces long-term maintenance costs.

3.The display surface features a hard-coated anti-glare treatment, effectively reducing reflections and improving durability.

4.The 1280×800 WXGA resolution provides ample display space, capable of simultaneously displaying multiple waveforms and parameters such as ECG, blood oxygen saturation, non-invasive blood pressure, and respiration. The 16:10 widescreen aspect ratio better meets the needs of displaying multiple parameters on the same screen.

►Installation Steps:

1.Disconnect all power.

2.Remove all screws from the back cover. Carefully separate the front and back covers of the monitor, locate the display adapter board, and carefully disconnect all cables connected to it. Note the cable connection positions for later reassembly.

3.Loosen the clips or frame securing the display screen and carefully disconnect all cables from the LCD panel. Then remove the old LCD screen from the housing.

4.Carefully place the new LCD screen into the housing and reconnect all cables.

Reinstall the frame or clips to secure the LCD screen.

5.Place the new display adapter board in place and secure it with four screws.

Reconnect all cables to the new display adapter board.

6.Reassemble and secure the front and back covers of the monitor.

Connect the power supply and battery, and power on to perform a functional test.

If you urgently need to replace the MX450 Patient Monitor LCD Display, please send me an inquiry and I will give you a quote immediately.