Mindray D3 Defibrillator Printer Mounting Clip 043-000987 Plastic Fixing Bracket

Mindray D3 Defibrillator Printer Mounting Clip 043-000987 Plastic Fixing Bracket 

 
 
► Brief Introduction
 

This is a printer mounting bracket, part number 043-000987.

This bracket is made of light gray PC plastic, a sturdy material with a U-shaped frame structure. The left and right sides fit snugly against the printing panel for positioning, while the bottom bears the load. Two protruding holes on the bottom allow for secure mounting to the printer body.

The main purpose of this bracket is to secure the printer for the D3 defibrillator, providing shock absorption and preventing loosening, ensuring stable printing during device movement.

 
 
► Features

1.Positioning the Printing Module

The U-shaped design of the bracket perfectly matches the dimensions of the printing panel, securing the printing module and preventing wobbling or shifting during transport in carts and ambulances. This avoids paper skewing, paper jams, and misaligned print waveforms.

2. Reinforced and Sturdy

Multiple internal reinforcing ribs enhance impact resistance, making it less prone to breakage during hospital transport and emergency calls. Compared to ordinary thin plastic brackets, it has a longer lifespan.

3. Reserved Space for Ribbon Cables

A pre-existing gap inside the frame prevents compression of the flexible ribbon cable on the back of the printing module, avoiding long-term bending, wear, and breakage, and preventing intermittent printing malfunctions.

4. Simple Installation

Utilizing a snap-fit ​​and screw fixing method, it can be directly inserted into the machine's mounting slot. Changing the print panel does not require disassembling the entire machine casing, allowing for quick assembly and disassembly of the printing assembly and reducing downtime for emergency equipment maintenance.

► Parameters
 

 
 
► Product Picture
 


 

►FAQ
 

Q1: The print panel is loose after installation and makes a rattling noise when pressed. Will replacing only this bracket solve the problem?

A1: Yes, wear on the bracket snaps and slight deformation of the frame can cause the panel to not lock properly. Replacing it with a new fixing bracket will eliminate the shaking and rattling.

Q2: This bracket has become white and brittle after long-term alcohol disinfection. Does it need to be replaced?

A2: Whitening indicates plastic aging, making it prone to breakage even with slight impacts. It is recommended to replace it in advance to prevent the bracket from breaking and losing its fixing function during hospital calls.

Q3: What problems will occur if the print panel is installed directly into the machine without this bracket?

A3: Without fixed position, the printing module will shift during transport and bumps, which can easily cause paper jams, skewed paper feed, and broken FPC cables. In severe cases, the print head may be damaged by impact with the machine casing.

90 Day Warranty                             SGS ceryification