High-quality Mindray D3 defibrillator printer paper width 5CM Replacement

High-quality Mindray D3 defibrillator printer paper width 5CM Replacement

 
 
► Brief Introduction
 

This is original Mindray printing paper for the Mindray D3 defibrillator. It's a thermal paper, 5cm in size, perfectly matched to the D3 defibrillator printer. This paper is sold in rolls.

The paper features evenly spaced tear lines along the sides, allowing for smooth tearing of reports after printing. The edges are clean and do not tear ECG curves. The paper also has markings for medical staff to accurately review printed data, enabling timely and accurate diagnostic instructions and improving clinical efficiency.

 
 
► Features

1. Clear Color Development

The paper surface has a thermal coating. Low-power heating ensures clear printing while avoiding high-temperature burning, reducing printhead wear and extending component lifespan.

2. Excellent Fade Resistance

This paper uses a medical-grade thermal coating, resisting light and moisture, allowing for long-term preservation of emergency reports, suitable for hospital archiving.

3. Width Fit

The paper width perfectly matches the D3 printer's tray size, with no gaps after loading, ensuring smooth and even paper feed, reducing print content deviation and paper jams.

► Parameters
 

 
 
► Product Picture
 


 

►FAQ
 

Q1: What problems will occur if I use printing paper that is not 5cm wide?

A1: Incorrect width will cause paper to shift laterally, resulting in truncated ECG waveforms, blank half of the printout, and in severe cases, paper jams that damage the print head.

Q2: The printed text is faint and the waveform is blurry. Is this a print head malfunction or a paper problem?

A2: First, try using the dedicated thermal paper for this model. Inferior thermal paper has poor coating sensitivity, resulting in lighter prints under the same conditions. Changing to compatible paper will improve the situation.

Q3: The printed text disappears after a period of time. What could be the reason?

A3: This is because non-medical thermal paper is being used. Ordinary thermal paper is not light- and moisture-resistant, and the printed content does not last long enough. If the text still disappears quickly after changing to medical thermal paper, check if the paper has been exposed to direct sunlight for a long time or stored in a humid, sterile area.

Q4: What problems will occur if a loose or unrolled paper roll is loaded into the printer?

A4: Loose paper rolls can cause paper feeding difficulties and frequent paper jams, interrupting report printing during emergency repairs and damaging the internal paper feed motor.

90 Day Warranty                             SGS ceryification