Mindray D3 defibrillator printer and parameter panel assembly (including ECG interface 050-000382-00)

Mindray D3 defibrillator printer and parameter panel assembly (including ECG interface 050-000382-00) 

 
 
► Brief Introduction
 

This is the original built-in printer for the Mindray D3 monitor defibrillator. It's a used component unpacked from the device, but in 90% new condition with no significant signs of use. A test video will be sent to you for confirmation before shipping.

The printer is integrated with the device's parameter module. Below the paper output tray is an ECG cable interface, allowing for normal connection to the ECG cable and acquisition of raw ECG signals. The acquired signal is quickly transmitted to the mainboard and printed.

 
 
► Features

1. Printing + ECG Acquisition

This accessory combines printing and ECG signal acquisition functions, simplifying device components and reducing troubleshooting time.

2. Stable Signal Transmission and Interference Resistance

Equipped with a custom-designed impedance cable, this accessory ensures stable ECG waveform transmission even under electromagnetic interference, with no noise, no lost printing commands, and no blank prints or waveform misalignments.

3. Visualized Operating Status

The accessory displays corresponding indicator lights when there are issues such as paper shortages, paper jams, ECG electrode detachment, or communication abnormalities, allowing medical staff to quickly locate the problem without disassembling the device.

4. Quick Paper Change

Equipped with a snap-on paper tray, paper changing requires no tools. Thermal paper loading is completed in 3 seconds, allowing for rapid output of paper-based cardiac rhythm records during emergency resuscitation, facilitating medical record preservation.

► Parameters
 

 
 
► Product Picture
 


 

►FAQ
 

Q1: The panel printer is not outputting paper, but the device is not reporting any errors, and ECG data acquisition is normal. Where in the assembly is the fault located?

A1: It may be due to poor contact in the internal printer motor or a damaged printer driver board. The entire panel assembly is an integrated design; replacing the assembly alone will restore paper feeding.

Q2: All panel indicator lights are off, but printing and ECG functions are normal. What could be the cause?

A2: The cable plugs on the back are oxidized, or the power supply circuit inside the panel indicator lights is damaged. Replacing the entire panel assembly will fix the problem in one go.

Q3: Can the device perform AED defibrillation normally without this panel assembly?

A3: The defibrillation function can work temporarily, but it cannot print cardiac rhythm reports, cannot connect to external ECG signals, and has no status fault indication. Long-term use is not recommended.

90 Day Warranty                             SGS ceryification