Edan CADENCE II fetal monitor display screen with complete housing including indicator lights

Edan CADENCE II fetal monitor display screen with complete housing including indicator lights

► Brief Description

The display screen, with a complete housing and indicator lights, is compatible with the Edan CADENCE II fetal monitor. The 5.7-inch screen is housed in a robust plastic casing, providing excellent physical protection against impacts and friction, as well as water and dust resistance, ensuring the internal precision components remain undamaged. An indicator light illuminates to show that the device has started normally. In emergency situations, a dedicated alarm indicator light in a prominent location will flash in different patterns: for medium-level alarms, it will flash rapidly at a frequency of 0.5Hz to quickly raise awareness; while for low-level alarms, the indicator light will remain constantly lit.

► Specifications

►Detailed Photos

►Functions

1.Serving as the main frame of the equipment, it precisely and securely fixes all internal components such as the motherboard, battery, and printing module, preventing internal loosening or damage due to vibration during movement or handling.

2.Provides robust physical protection and sealing. The outer shell effectively resists daily bumps, squeezes, and drops, achieving an IP54 dustproof and waterproof standard. It prevents disinfectants, moisture, dust, lint, etc., from entering the interior, preventing circuit board oxidation and short circuits.

3.The display assembly is provided with a dedicated, precision frame. This frame precisely fixes and limits the screen, providing shockproof, scratch-proof, and impact-proof protection, effectively preventing screen breakage or display misalignment.

4.The outer shell surface is made of wear-resistant and disinfectant-resistant material, capable of withstanding repeated wiping with alcohol and chlorine-containing disinfectants without yellowing, aging, or cracking.

►Installation Steps:

1. Disconnect all power to the device.

2. Unscrew all visible screws on the bottom and back of the device and keep them safe. These screws may be of varying lengths; it is recommended to mark them clearly for easy reassembly. Gently pry open the clips along the seam of the outer casing to separate the bottom and top casings. Be careful during this process to avoid damaging the internal ribbon cables and plastic clips.

3. Locate the ribbon cable connector for the old screen, gently release the connector clips, and then carefully pull out the ribbon cable,and remove the old screen.

4. Place the new screen assembly into the outer casing slot, aligning it accurately, and secure it with screws or adhesive.

Insert the new screen's ribbon cable into the motherboard connector, ensuring the cable is flush and fully inserted, and tighten the clips.

5. With all hardware installed and the outer casing closed (but not yet screwed in all screws), connect the power and test the device. Ensure the new display lights up normally and all functions are normal before assembling the device.

Thank you for taking time to our display screen with complete housing for Edan CADENCE II fetal monitor , if you want to explore more details, please send inquiry to us, looking forward to hearing from you.