PHiliph MP2/X2 Patient Monitor Moduel Mainboard M3002-68550 584328501 453564328491

Main Board for MP2/X2 Monitor

PHiliph MP2/X2 Patient Monitor Mainboard M3002-68550 584328501 453564328491

► Brief Description

The MP2/X2 monitor is an extremely lightweight and highly flexible device. The motherboard features an embedded processor designed for low power consumption and high stability. Its circuit design is extremely optimized for energy efficiency; it not only drives the real-time waveform rendering of the 3.5-inch color display but also simultaneously processes complex clinical algorithms such as multi-lead arrhythmia analysis and ST-segment analysis, ensuring no data loss or delay during patient transport.

► Functions

The MP2 motherboard boasts powerful signal integration capabilities. It integrates sophisticated front-end analog circuitry, directly interfaced with various physiological parameter modules:

1. Multi-parameter compatibility: The motherboard accurately processes raw analog signals from 12-lead ECG, FAST-SpO2 oxygen saturation, invasive blood pressure (IBP), body temperature, and main/bypass carbon dioxide (CO2) monitoring, converting them into high-precision digital signals.

2. Wireless telemetry support: The motherboard integrates a high-performance wireless communication module interface, ensuring real-time indoor data transmission even without cables.

3. External expansion interfaces: The motherboard provides standard network interfaces and external printer ports, optimizing data exchange in clinical workflows.

► Removing the Main Board

1. Remove the battery.

2. Remove the handle.

3. Remove the display screen.

4. Remove the NBP pump assembly.

5. Remove the power board.

6. Remove the speaker.

7. Remove the NBP airflow/instrument telemetry (IIT) assembly.

8. Remove the ECG sync pulse output connector.

9. Disconnect the measurement connection. Carefully loosen the connector by gently pulling and moving it back and forth. The connection between the measurement module and the main board is very tight, so you will feel some resistance when loosening it.

10. Lift the main board upwards so that it is connected to the same side as the power board, and you can remove the main board.

11. Open the plastic clips on the main board and remove the flexible cable. Be careful when opening the connector, as damaged clips cannot be replaced.

12. Reassemble in the reverse order of steps 1-10.

► BMS

The PHiliph MP2/X2 Patient Monitor Mainboard M3002-68550 features a built-in intelligent power management unit that seamlessly switches between external power, the internal lithium battery, and the X2/MP2 battery expansion module in milliseconds. The motherboard monitors battery health and charging/discharging temperatures in real time and intelligently adjusts the power supply to each functional module in low-power modes (such as automatic brightness reduction), which is the key hardware foundation for achieving long battery life.

Thanks for your interest in PHiliph MP2/X2 Patient Monitor Mainboard M3002-68550 584328501 453564328491, please feel free to contact me. Thank you for your time and wish you have a happy life.

90 Day Warranty                             SGS ceryification