Nihon Kohden ECG-1350P 12-Lead Electrocardiograph With Thermal Array Printer Used Unit
The Nihon Kohden ECG-1350P is a professional 12-lead electrocardiograph designed for accurate cardiac diagnosis in hospitals, clinics, and emergency departments. This refurbished unit features a clear LCD screen displaying real-time ECG waveforms, a thermal array printer for instant hard-copy results, and intuitive control buttons for easy operation.
Despite visible signs of prior use (minor scratches and wear on the casing), the device maintains full functionality: the screen displays crisp waveforms, all buttons respond reliably, and the printer produces clear, smudge-free printouts. Ideal for healthcare facilities seeking a cost-effective, high-performance ECG solution, it supports both AC power and rechargeable battery operation for flexible use in various settings.
| Product Name |
Nihon Kohden ECG-1350P Electrocardiograph |
| Model |
ECG-1350P |
| Material |
Medical-Grade Plastic Casing |
| Function |
ECG Recording, Waveform Analysis, Thermal Printing |
| Color |
White |
| Warranty |
90 days |
1. Pre-Use Check:
Ensure the battery is charged (green LED indicator) or connect to AC power. Verify electrode cables are securely attached to the patient and device.
2. Operation:
Press the "Start/Stop" button to begin recording; use the "Lead Select" keys to switch between 12 leads. Adjust gain (sensitivity) and paper speed via the control panel as needed.
3. Printing:
Press the "Print" button to output the current waveform. Replace the thermal paper roll when the "Paper End" indicator lights up.
4. Maintenance:
Clean the casing with a soft, damp cloth (avoid harsh chemicals). Store in a dry environment (10-40°C) to prevent moisture damage.
5. Battery Care:
Fully charge the battery before first use; avoid deep discharge (recharge when the low-battery indicator appears).
1. Unpacking:
Remove the device from packaging and check for physical damage. Ensure all accessories (electrode cables, power cord, thermal paper) are included.
2. Power Connection:
Plug the AC power cord into the device’s rear socket and a grounded outlet. For battery use, ensure the battery is installed (located in the bottom compartment).
3. Electrode Connection:
Attach the 10 electrode cables (RA, LA, RL, LL, V1-V6) to the corresponding ports on the device. Apply electrodes to the patient’s skin (clean and dry) as per standard ECG placement guidelines.
4. Paper Loading:
Open the printer cover, insert the thermal paper roll (print side facing down), and close the cover until it clicks.
Your message must be between 20-3,000 characters!
