GE PRO1000 Patient Monitor alarm indicator board with button panel and indicator lights PW640510A
This is a key component of the GE PRO1000 patient monitor: a circuit board with buttons and indicator lights. The front of the board clearly displays the part number, PW640510A.
The circuit board has nine button combinations, labeled SW1-SW8 next to each button and indicator light, corresponding to the device's button operations.
The circuit board features multiple indicators of different colors, mostly yellow and green LEDs, with only one red LED serving as the emergency alarm indicator. The rest are for warnings and status indications, such as button indicators.
The circuit board has four pre-drilled screw holes for securing the panel to the front cover of the device; the right side has a pin header interface for connecting to the mainboard.
1. Button Control: The circuit board features eight buttons, each corresponding to a different monitor function, such as power on, alarm mute, parameter adjustment, and printing. This allows medical staff to perform core operations and quickly identify device status without delving into menus, significantly improving clinical operational efficiency.
2. Multi-Color Status Indicator Lights: Equipped with red, green, and yellow LEDs, corresponding to emergency alarms, normal operation, and early warning prompts, the monitor's operating status is clearly displayed. Combined with audible alarms, this enhances clinical early warning efficiency.
3. Signal Isolation and Anti-Interference Design: Independent signal filtering isolates various signals, effectively shielding electromagnetic interference generated by internal components. This completely avoids accidental button presses and erratic indicator light flashing, ensuring rapid alarm delivery.
4. High Durability: Utilizes high-lifespan microswitches that are fatigue-resistant, can withstand repeated switching, and offer sensitive response.
Technical Specifications
|
Product name
|
Alarm indicator board
|
|
Machine model
|
PRO1000
|
|
P/N
|
PW640510A
|
|
MOQ
|
1PC
|
|
Condition
|
Good working
|
|
Material
|
PCB board
|
|
Color
|
Green
|
|
Weight
|
About 150g
|
|
Warranty
|
90 days
|
Product Images
Q1: If the buttons are unresponsive or the indicator lights are not on, is it a problem with this panel?
A1: There is a certain probability that the problem is with this panel, which needs to be checked to determine. First, check for loose or oxidized wiring, and damaged cables. If these are ruled out, check if the buttons and LEDs are burnt out. If the interfaces are normal, the fault is likely with this panel; if the panel is intact, the problem may be with the mainboard.
Q2: What functions do the SW numbers on the panel correspond to?
A2: Based on the device's button settings and the corresponding SW numbers, the functions are: SW1 = Print Start/Stop, SW2 = Alarm Mute, SW3 = Menu, SW4 = Monitoring Mode Switch, SW5 = Power On/Off, SW6 = Freeze, SW7 = Record, SW8 = System Settings (specific settings depend on the device firmware).
Q3: Can the LEDs on the circuit board be replaced individually?
A3: Individual LED beads can be replaced, but professional soldering is required; it is not recommended to replace the LED beads. Replacing the entire circuit board is the most efficient and safest solution, avoiding potential problems such as poor contact and interference after repair.
Ordering Information
| Payment Methods |
Bank Transfer / PayPal / Western Union |
| Shipping Methods |
DHL / FedEx |
Your message must be between 20-3,000 characters!
