Philipph MX_100 X3 Patient Monitor MSL board PN 453564673811 LPN 782879753 with box

MX_100 X3 Patient Monitor MSL board PN 453564673811 LPN 782879753

with box

► Brief Description

The MSL board is for the IntelliVue MX_100 X3 monitor. It's green, made of a special metal material, and has interfaces for connecting to the monitor. The surface is marked with the original manufacturer's serial number PN 453564673811. It's brand new and comes with its original box. The LPN is 782879753, which is compatible with certain software versions. This board is a core component of the IntelliVue MX_100 X3 monitor, which features a color touchscreen display and can monitor multiple parameters simultaneously. It supports multi-touch screen operation with single or two-finger swipes and clicks.

► Specifications

►Detailed Photos

►Installation Steps:

1. Disconnect Power

Remove the screws from the back cover and bottom of the monitor. Locate the MSL board and carefully disconnect all connecting cables. Unscrew the screws securing the MSL board and remove the old board from the housing.

2. Install the Mainboard

Place the new MSL board PN 453564673811 into the housing, aligning it with the screw holes, and tighten the screws.

Refer to the disassembly notes and reconnect all cables to the board. Ensure all ribbon cables are securely plugged in and clips are locked.

3. Close the back cover, but do not fully tighten all screws yet. Connect the power adapter and attempt to power on. Check if the display lights up and if the buttons are responsive.

4. Calibration and Testing

After completing calibration and passing the tests, fully assemble the device, tighten all screws, and perform a final power-on self-test to ensure all alarm functions are working properly.

►Precautions:

1. When the device experiences a black screen upon startup, repeated system restarts, touchscreen malfunction, or unrecognizable parameters/modules, first check the motherboard's operational status.

2. When ordering a replacement board, strictly verify the original configuration on the machine's service label. Ensure the new motherboard's PN is 453564673811 and LPN 782879753 meets the current device's firmware upgrade requirements.

3. Because the MSL board integrates high-density chips, an anti-static wrist strap must be worn during replacement to prevent electrostatic discharge damage to sensitive components.

4. After replacing the MSL board, a comprehensive functional check is required, including simulator testing, network connectivity testing, and battery charge/discharge testing, to ensure the new MSL board is functioning correctly.

Thank you for your time,if you are interested in MX_100 X3 Patient Monitor MSL board PN 453564673811 LPN 782879753, please feel free to contact me.