EDAN F2 Fetal Monitor Cooling Fan RDL4010B DC12V 0.06A replacement fan for medical equipment
This is a disassembled accessory from the EDAN F2 fetal heart monitor which is monitor's built-in fan, model RDL4010B, operating at 12V DC. The cooling fan has a 40*40mm square design. Constructed with a durable black ABS plastic frame and 7 blades, it comes complete with a 20cm cable and mounting screws for easy installation.
This unit, located inside the F2 monitor, starts running after the device is powered on. It dissipates heat generated by the internal components, lowering the internal temperature and preventing overheating that could affect the device's operation.
1. Reliable Heat Management
The fan is specifically designed for the EDAN F2 fetal monitor, effectively dissipating heat from the motherboard, power module, and other heat-generating components to prevent device crashes or performance degradation due to overheating.
2. Whisper-Quiet Performance
With a low current design of 0.06A, it operates with low noise, suitable for quiet clinical environments.
3. Long Lifespan
Tested to have an average lifespan of up to 50,000 hours, meeting the requirements for long-term stable operation of medical equipment.
4. Original Factory Compatibility
The fan's connector is fully compatible with the EDAN F2's power supply interface and mounting position, allowing for direct replacement and ensuring compatibility of the cooling system.
Technical Specifications
|
Product name
|
Fan
|
|
Model
|
RDL4010B
|
|
Type
|
Monitor parts
|
|
Voltage
|
DC12V
|
|
Current
|
0.06A
|
|
Size
|
40*40mm
|
|
Material
|
ABS plastic
|
|
MOQ
|
1 Piece
|
|
Warranty
|
90 days
|
Product Images
Q1: My F2 fetal heart monitor overheats during operation. Is it a cooling fan malfunction?
A1: It might be a cooling fan malfunction. First, check if the connection cable between the fan and the main unit is loose. If it's not loose, use a professional multimeter to check if the fan voltage is normal. If the voltage is normal, then the problem lies with internal fan components, and the cooling fan needs to be replaced.
Q2: The cooling fan is running normally, but there's an unusual noise during operation. What could be the cause?
A2: Check if any foreign objects have entered the fan, or if the fan blades are tangled. Clean them and test again. If the abnormality persists, it may be due to severe wear of internal fan components, and replacement of the fan is recommended.
Q3: How should I maintain the fan?
A3: Clean the fan blades and frame regularly to prevent airflow blockage; regularly check the fan's operating status. If unusual noises or abnormal speed occur, replace it immediately.
Ordering Information
| Payment Methods |
Bank Transfer / PayPal / Western Union |
| Shipping Methods |
DHL / FedEx |
Your message must be between 20-3,000 characters!
