Biocare IM12 Patient Monitor Parts Power Supply Board 02045052 E204460 94V-0

Product Details:

Brand Name:	Biocare
Model Number:	02045052 E204460

Payment & Shipping Terms:

Minimum Order Quantity:	1
Delivery Time:	3-5 working days
Payment Terms:	T/T, Western Union，Paypal

Contact Now

Detailed Product Description

Product Name:	Power Supply Board	Part No:	02045052 E204460
Machine Application:	Biocare IM12 Patient Monitor	(AC) Input Voltage:	100 V～240 V
Input Power:	75 VA	Frequency:	50 Hz/60 Hz (Allowable Frequency Error ±1Hz)
Fuse:	3.15A/250V	Safety Classification:	Class I, Type BF, CF
Operating Temperature:	0°C - 40°C	Warranty:	90 Days
Highlight:	Biocare IM12 power supply board , Patient monitor replacement power board , 94V-0 rated monitor parts

Biocare IM12 Patient Monitor Parts Power Supply Board 02045052 E204460 94V-0

Brief Introduction:

This power board provides stable power to the Biocare IM12. Key components include: a yellow high-frequency transformer responsible for primary and secondary voltage conversion; multiple black electrolytic capacitors and copper-colored inductors forming a filtering circuit to ensure stable output voltage; and black heatsinks closely attached to heat-generating components, working in conjunction with the board's copper-clad heatsink design to prevent overheating. It converts external AC power or internal battery DC power into multiple precise low-voltage DC currents through transformers, capacitors, and other components to power the motherboard, display, and other components. It also integrates overvoltage and overcurrent protection and battery charge/discharge management functions.

Power Supply Failure

Symptoms

Possible Cause

Solution

No +5V output/

No +12V output

1. Power supply protection

2.Power board failure

1. Turn off the monitor thenrestart it.
2. If the problem remains,disconnect the AC mains for 5 s and reconnect it, then restart the patient monitor.

3. If the problem still remains,replace power board.

No +3.3V output

1. Power board failure

2. Main board failure

1. Replace power board

2. Replace main board

AC Power Supply Connection:

Before connecting the AC power supply, first check the status of the monitor and its associated modules. Follow these steps to connect the AC power:

Ensure the AC power supply meets the following specifications: AC 100V～240V, 50 Hz/60 Hz. Use the power cord provided with the monitor—plug one end into the monitor’s power interface, and the other end into a single-phase outlet with protective grounding.
Use the dedicated grounding wire supplied with the monitor to connect the device to the protective ground terminals.

Special note: Ensure the monitor is properly grounded at all times.

Disassembling the Power Board

1. Remove the four M3*8 screws from the back cover by unscrewing them completely.

2. Separate the front and back covers, then disconnect the connecting cables for the screen and button board.

3.To remove the power board: Unscrew the three M3*6 screws and two ST2.9*8 screws completely. When lifting the power board out, be sure to disconnect all power connection cables first.