Biolight BLT Q5 Patient Monitor System Interface Board Q5BP02 13-056-0003 spare part

Biolight BLT Q5 Patient Monitor System Interface Board Q5BP02 13-056-0003

spare part

► Brief Description

The Q5BP02 interface board plays a crucial role in the BLT Q5 patient monitor. It acts as a bridge between the monitor and various monitoring modules, coordinating and processing the transmission and conversion of multiple detection signals. As the monitor's "information hub," it ensures that critical vital sign data such as ECG, SpO₂, NIBP, RESP, and body temperature flow accurately and promptly within the system. This interface board is made of green metal, making it sturdy, durable, and reusable. Its surface features numerous black and white connectors, which are the main interfaces for connecting various modules. Four screw holes are located near the four corners for securing the monitor, preventing loosening and poor contact.

►Advantages of the Q5BP02 Interface Board:

1. Excellent signal integrity and system compatibility: Through its sophisticated analog-to-digital converter (ADC) and digital signal processor (DSP), the Q5BP02 interface board converts analog signals from various sensors into high-fidelity digital data while maintaining an extremely low signal-to-noise ratio.

2. Stable operation: It can operate stably across a wide temperature range (-10℃ to 60℃) and under varying humidity conditions, maintaining high performance even after nearly 6 years of continuous operation.

► Specifications

►Detailed Photos

►Q5BP02 Interface Board Installation Steps:

1. Disconnect Power and Remove the Q5 Monitor Back Cover

Use a screwdriver to remove all screws securing the back cover and carefully remove it. Note any cables that may be connected to the back cover.

2. Locate and Remove the Old Interface Board

Locate the interface board (Q5BP02) to be replaced on the mainboard or within the frame.

Observe and record the location and direction of all cables connected to this board; taking photos is recommended.

Carefully remove the old board from its mounting position.

3. Install the New Q5BP02 Interface Board

Align the new Q5BP02 interface board with the slot or mounting location and insert it smoothly and vertically, ensuring good contact with the slot. Secure it firmly with screws. Reconnect all cables, ensuring each cable is plugged in correctly and in the correct direction, and tighten the locking devices.

4. Preliminary Inspection and Assembly

Check that all cables are connected. Replace the back cover and tighten all screws.

5. Power-On Test and Function Verification

Press the power button to turn on the monitor and note any abnormal alarms or error codes. Test all physical interfaces provided by the Q5BP02 board to confirm that they are functioning normally.

►Warning: This interface board must be installed and maintained by a qualified medical engineer. A complete monitor calibration must be performed after installation to ensure patient safety.

►FAQ:

Q1:What is the product warranty period?

A1:The product has a 90-day warranty, we can replace or refund you within the warranty period.

Q2: When can I receive my product?

A2: It usually takes 5-7 working days.

Q3: Does the price include shipping cost?

A3:The shipping cost not included, delivery terms FOB..

Q4:This interface board can be used immediately after installation, right?

A4: Yes,

If you want to explore more details about Biolight BLT Q5 Patient Monitor System Interface Board Q5BP02 13-056-0003 spare part, please contact me at any time, looking forward to your early inquiry.