Biolight BLT Q5 Patient Monitor speaker assembly 0.5W 8Ω Patient Monitor part

Biolight BLT Q5 Patient Monitor speaker assembly 0.5W 8Ω Patient Monitor part

► Brief Description

The 0.5W 8Ω speaker assembly is an important accessory for the BLT Q5 Patient Monitor. The speaker emits voice signals via audio signals, informing medical staff about the patient's condition, trends, critical/risk situations, and the monitor's operational status. Medical staff can use the speaker's voice prompts to assess the patient's condition. Common dynamic speaker impedances include 4Ω, 8Ω, 16Ω, and 32Ω, while our Q5 Patient Monitor speaker has an impedance of 8Ω.

►Features

1. With a power output of 0.5W, the speaker's alert tone can be clearly heard even in noisy environments, without disturbing or startling patients.

This speaker has low power requirements, eliminating the need for a dedicated amplifier circuit and can be directly driven by the motherboard, improving the energy efficiency of the monitor system.

2. The 8Ω standard impedance ensures optimal matching with the Q5 monitor's internal audio drive circuitry. This enables efficient conversion of electrical energy to acoustic energy, achieving maximum output power and optimal frequency response while protecting the drive circuitry from overload.

3. The speaker has undergone rigorous medical-grade durability testing, ensuring performance does not degrade under prolonged continuous operation, temperature and humidity changes, and regular disinfection conditions. Its connections typically employ anti-loosening designs to prevent loss of sound due to poor contact caused by vibration.

4. The speaker's acoustic profile is not designed for music appreciation but is optimized to highlight the key frequency bands of the alarm tone, making it highly penetrating, easily identifiable, and less prone to confusion with ambient noise.

► Specifications

►Detailed Photos

►How to Install the Speaker

1. Disassemble the Monitor Housing

Use a screwdriver to remove the screws on the back of the Q5 monitor housing. Then, use a plastic pry bar to gently pry open the clips along the seams of the housing and remove it.

2. After opening the housing, locate the speaker near the motherboard. Carefully disconnect the speaker cable and remove the speaker.

3. Replace the Speaker

Reassemble the speaker using the same method as before, ensuring the plug is securely inserted.

4. Assembly and Testing

Before reassembling the housing, check that all connections are secure and connect the power supply. Test the monitor's alarm sounds, button tones, etc., to ensure they are working properly, the volume is appropriate, and there is no distortion. Keep the testing time short and prioritize safety.

After confirming that the tests are successful, disconnect the power supply, carefully reassemble the housing, and tighten all screws.

Thank you for your interest in Biolight BLT Q5 Patient Monitor speaker assembly 0.5W 8Ω Patient Monitor part​​ , if you want to know more details,please feel free to contact me.