Mindray Datascope Passport2 Pump Assembly With Wiring Conduit 0012-00-1249 0406-00-0750A Replacement

• Specifications

• Product Description

This component is a core part of the non-invasive blood pressure (NIBP) measurement system of the Mindray Datascope Passport2 monitor. It consists of an air pump assembly (0012-00-1249) and a wiring harness and catheter module (0406-00-0750A), and is an original factory replacement part.

The pump comes with a motor and protective housing, and includes a transparent silicone air hose; the wiring harness uses robust flat cables to ensure a stable electrical connection.

Troubleshooting Tip: If your Passport 2 monitor fails to inflate the blood pressure cuff or displays a 'Pump Failure' error code, replacing this pump assembly is often the solution.

• Usage & Installation Guide(how to replace the pump):

1. Remove the back cover of the Datascope Passport2 monitor using a screwdriver.

2. Locate the existing pump assembly (near the NIBP module) and disconnect the air tube and ribbon cable.

3. Unscrew the metal mounting bracket (4 screws) and remove the old assembly.

4. Install the new Pump Assembly with Wiring Conduit, securing it with the original screws.

5. Reconnect the air tube to the pump inlet and attach the ribbon cable to the mainboard connector.

6. Reassemble the monitor housing and power on for a system self-test.