Mindray Datascope Passport 2 Printer Interface Board 0670-00-1153 0380-00-1153 Replacement

• Specifications 

• Product Description

The green PCB substrate integrates signal processing chips, interface sockets, and ribbon cable connectors, and comes with flat ribbon cables for inter-board communication, meeting the high stability requirements of medical equipment.

The silkscreen "0388-00-1153" on the circuit board in the picture is the version identifier in the production process ("REV A" represents hardware version A), which belongs to the same series of derivative models and is compatible with the above models in terms of core functions.
 
If your monitor displays a 'Printer Error' or fails to print waveforms, please check if this interface board is oxidized or loose.

• Key Specifications:

• Usage & Installation Guide:

1. Installation Prerequisite: Turn off the monitor power, disconnect all external devices, and wear an anti-static wrist strap.
 
2. Physical Connection: Align the board’s latch with the monitor’s slot, gently push until fully seated, and ensure the ribbon cable is tightly connected to the motherboard interface.
 
3. System Verification: After power-on, go to the monitor’s “Settings-Peripherals” menu, confirm “Printer Status” is “Connected”, and verify data integrity via “Test Print”.
4. Troubleshooting: If printing fails, first check if the ribbon cable is loose/oxidized, then confirm printer compatibility (Datascope original thermal printers are recommended).
 
Expert advice: Before disassembling an old circuit board, be sure to take photos to record the location of the ribbon cables to prevent incorrect installation.