Biolight BLT Q5 Patient Monitor Parameter Panel Component Q5PROBE02 13-056-0006

Biolight BLT Q5 Patient Monitor Parameter Panel Component Q5PROBE02    13-056-0006

► Brief Description

The parameter panel component consists of a sturdy, durable plastic upper panel and a green metallic lower panel. These two layers combine to form the parameter panel assembly, which is designed for the BLT Q5 monitor. The main function of this parameter panel is to automatically measure the current status of the Q5 monitor and feed the data back to the monitor's main controller. The system then automatically adjusts the monitor's backlight intensity and color. The Panel Component Q5PROBE02 13-056-0006 makes subtle adjustments based on the monitor's environment and temperature to maintain a clear and stable image.

► Specifications

►Detailed Photos

►Steps to Install the Q5PROBE02 Parameter Panel onto the Q5 Monitor

1. Power off the BLT Q5 Monitor.

Unplug the AC power cord.

If there is a built-in battery, remove it and ensure the main unit is completely powered off.

2. Locate the Q5PROBE02 Parameter Panel Slot

The parameter panel slot is usually located on the side or back of the Biolight Q5 monitor main unit. Confirm that the physical shape and pin count of the slot match the Q5PROBE02 parameter panel interface.

3. Install the Q5PROBE02 Parameter Panel

Align the connector edge of the parameter panel with the guide rail of the main unit slot. Smoothly and horizontally push the parameter panel into the slot until you feel the module fully inserted, usually with a slight "click" or a locking feel. Do not use excessive force.

4. Post-Installation Check and Test

Check that the module is securely installed and not loose. Insert the new battery and connect the AC power cord. Power on the Q5 monitor. After the monitor starts up, the system will usually automatically recognize the newly installed hardware.

The system may prompt you to perform a self-test or calibration of the new parameter panel. Please follow the on-screen instructions.

►If you encounter the following problems:

1.Parameter Panel Component Q5PROBE02 not recognized: After powering off, unplug and replug the Parameter Panel Component to ensure good connector contact.

2.Error messages: Record any error codes or messages displayed on the monitor screen. This will help technicians diagnose the problem.

3.Abnormal measurement data: Calibration of the Parameter Panel Component Q5PROBE02 may be required by a professional engineer.

Thanks for your interest in Biolight BLT Q5 Patient Monitor Parameter Panel Component Q5PROBE02 13-056-0006 , please feel free to contact me. Thank you for your time and wish you have a happy life.