Goldway UT3000A monitor ECG board LKGW Twins-02 used in good working 

►Brief Description

The LKGW Twins-02 ECG board plays a crucial role in the UT3000A monitor. This green metal board features several interfaces for connecting to the various cable interfaces of the UT3000A monitor. It also houses several small button batteries to power the ECG board. The board bears the original manufacturer's PN markings, allowing users to distinguish it from other boards and indicating its originality and perfect compatibility with the UT3000A monitor. The primary function of the LKGW Twins-02 ECG board is to monitor the patient's vital signs in real time, allowing medical staff to observe specific numerical changes on the monitor's display screen. The ECG board LKGW Twins-02 undergoes rigorous testing before leaving the factory and complies with the IEC 60601-1 safety standard, making it highly safe.

►Specifications

► Product photos

►ECG Board Installation Instructions:

1. First, disconnect the power to the UT3000A monitor, including unplugging the power cord and disconnecting the internal battery. Wear an anti-static wrist strap and insulating gloves.

2. Use a screwdriver to remove the back cover or side panel of the UT3000A. Locate the slot or connector on the mainboard used to connect the ECG module.

3. Align the interface, aligning the LKGW Twins-02 connector with the slot on the mainboard. Secure it with appropriate screws to prevent vibration from causing poor contact.

4. Ensure that the connecting cables between the ECG board and the monitor's front panel lead cable interface and limb lead cable interface are properly inserted and not excessively bent.

5. Power on and test. Once everything is working correctly, reassemble the casing.

►Troubleshooting and Maintenance Recommendations

1. Power Supply Check: First, measure the power supply input terminals of the ECG board to ensure stable voltage (typically including +3.3V, +5V, ±12V, etc.).

2. Lead Wire Interface: Often, the fault is not due to motherboard damage, but rather oxidation or poor contact at the lead wire interface. Clean the interface contacts.

3. Component-Level Troubleshooting: Focus on checking the analog switch chips, instrumentation amplifiers, and chips responsible for analog-to-digital conversion on the board. If the device experiences data loss during signal acquisition, it is often due to problems with these analog front-end chips or their peripheral circuitry.

►FAQ

Q1. How to resolve after-sales issues?

A1. Our products have a 90 days swarranty. If have any quality issues, we will replace or refund you.

Q2. What are the shipping methods?

A2. We have DHL, FedEx, and UPS, and can also use customer own official accounts.

Q3. How long will receive this goods?

A3. About 5-8 working days.

Thank you for your time,if you need the Goldway UT3000A monitor ECG board LKGW Twins-02 used​, please feel free to contact us. please contact me freely.