Biocare FM-801 Fetal Monitor Mainboard with 32-bit ARM Cortex-M4, 16-bit AD Converter, and 128MB Flash Memory

Product Details:

Brand Name:	Biocare
Model Number:	FM-801

Payment & Shipping Terms:

Minimum Order Quantity:	1 Piece
Price:	USD
Packaging Details:	Carton
Delivery Time:	3-5 working days
Payment Terms:	T/T,Western Union,Paypal

Contact Now

Detailed Product Description

Product Name:	Mainboard	PN:	02040119-01
Condition:	Good Working	Microprocessor:	32-bit ARM Cortex-M4
AD Converter:	16-bit Resolution, Sampling Rate 100Hz	Storage Capacity:	128MB Flash Memory
Alarm Type:	Fetal Heart Rate Is Too High/too Low, Variability Is Reduced, And Uterine Contractions Are Too Frequent	Alarm Mode:	Sound And Light Alarm
Size:	180mm×120mm×1.6mm	Weight:	About 150g
Highlight:	32-bit ARM Cortex-M4 Fetal Monitor Mainboard , 16-bit AD Converter Patient Monitor Mainboard , 128MB Flash Memory Biocare FM-801 Mainboard

Biocare FM-801 Fetal Monitor Mainboard 02040119-01

The Biocare FM-801 Fetal Monitor Mainboard, model 02040119-01, serves as the central processing unit of the Biocare FM-801 fetal monitor. This critical component receives, analyzes, and processes raw sensor data while coordinating the operation of all monitor subsystems to ensure accurate fetal monitoring and stable device performance.

Key Features

Signal Processing

Professional signal analysis capabilities amplify and filter raw fetal heart rate and uterine contraction data. The digital signal processor converts this information into readable waveforms, enabling medical staff to quickly assess fetal condition and identify abnormalities.

System Coordination

Controls key components including display and printhead through dedicated interfaces. Executes user commands and provides visual feedback to support efficient clinical workflow.

Data Management

Built-in 128MB flash memory stores over 1,000 complete monitoring reports with export capability. Automated alarm system triggers when data exceeds preset safety thresholds, alerting medical staff to potential concerns.

Diagnostic Capabilities

Integrated self-test circuit performs automatic system checks during startup. Displays fault codes and indicator status to facilitate rapid troubleshooting and minimize equipment downtime.

Technical Specifications

Product Name	Mainboard
Part Number	02040119-01
Compatible Device	Biocare FM-801
Condition	Good working
Processor	32-bit ARM Cortex-M4
AD Converter	16-bit resolution, 100Hz sampling rate
Storage Capacity	128MB flash memory
Alarm Types	Fetal heart rate (high/low), reduced variability, frequent contractions
Alarm Mode	Audible and visual alerts
Dimensions	180mm × 120mm × 1.6mm
Weight	Approximately 150g

Frequently Asked Questions

Q: The monitor shows no fetal heart rate waveform despite normal probe indicator. What's wrong?

A: If the probe works on other devices, check mainboard signal connections. No signal input indicates interface failure; signal without waveform suggests mainboard processing unit failure requiring replacement.

Q: Fetal heart rate values jump frequently with confirmed probe/power board function. Cause?

A: Likely mainboard signal filtering or algorithm issue. Check for magnetic interference, recalibrate, and if problem persists, replace mainboard due to potential filter capacitor or DSP chip damage.

Q: "Storage Full" persists after report deletion. Solution?

A: Possible storage module failure or file system corruption. Attempt formatting. If USB export fails with storage errors, replace mainboard due to shared circuit failure between USB and storage modules.

Ordering Information