100% New Original Monitor Parts Adult finger clip SpO2 Sensor with 3.0m Cable, Model DLM-011-02
Adult finger clip SpO2 Sensor with 3.0m Cable, Model DLM-011-02 is a sensor for measuring SPO2 in adults. The sensor is finger clip type, wired with a 3.0m wire, and has a 7-pin interface, making it compatible with a variety of monitors.
Product Specifications
| Type |
SpO2 Sensor |
| Model |
DLM-011-02 |
| Property |
Finger Clip |
| Using Group |
Adults/Children |
| Condition |
New |
| Cable length |
3.0m |
| Sensor Size |
35mm*20mm*15mm |
| Weight |
100g |
| Material |
Finger clamp: ABS; Cable: PU+shielding layer |
Core Functions
- Blood oxygen monitoring
- High comfort
- Long cable for versatile use
- Universal interface for high adaptability
Application Scenarios
1. Routine Monitoring of Inpatients
For inpatients requiring long-term blood oxygen monitoring, such as pneumonia patients.
2. Surgical Anesthesia Monitoring
During surgery, patients require continuous blood oxygen monitoring due to anesthesia-induced respiratory suppression. The sensor cable is designed to block electromagnetic interference, preventing data loss.
3. Emergency Rescue Scenarios
When emergency patients present with chest pain, dyspnea, or traumatic shock, rapid assessment of oxygenation status is essential. The finger-clip design allows for quick donning and power-on testing in 10 seconds, making it faster than traditional ear- or wrist-mounted sensors.
4. Home Rehabilitation Monitoring
For patients requiring home blood oxygen monitoring after discharge, the sensor is compatible with portable home oximeters for easy operation.
FAQ
Q1: When measuring blood oxygen, why does the device display "SpO₂ signal weak" or "unable to measure"?
A1: It could be due to improper wear or finger placement. Check that the sensor is properly worn. The sensor should be clipped to the tip of the finger, with the light-emitting diode and detector aligned on the fingertip.
If it is correctly worn, check the finger for swelling and any obstructions, such as nail polish.
If all is normal, the sensor is invalid and should be replaced.
Q2: After long-term wear, the patient's finger experiences pressure marks or numbness. How can I adjust the settings?
A2: It is recommended to change the monitoring finger every 2-3 hours to avoid trying to wear it on a single finger. You can also adjust the sensor clip to a fixed tightness to avoid being too tight or too loose.
Q3: If the outer sheath of the sensor wire is broken (exposing the internal wire), but it is still measuring, can I continue to use it?
A3: It is not recommended to continue using the sensor. The cracked outer protective shell of the sensor means that the shielding layer of the sensor cable is damaged, making it susceptible to electromagnetic interference during monitoring. When used in a ward or operating room, the measurement data will be affected, and the exposure of the internal cable will pose a safety risk. It is recommended to replace the sensor immediately.
Product Images
Ordering Information
| Payment Methods |
Bank Transfer / PayPal / Western Union |
| Shipping Methods |
DHL / FedEx |
Your message must be between 20-3,000 characters!
