KT1300614_4 RFI Board for GE Voluson E8 Ultrasound Machine Field Replaceable Unit Used Medical Spare Parts

RFI Board KT1300614_4 for GE Voluson E8

KT1300614_4 RFI Board for GE Voluson E8 Ultrasound Machine, Field Replaceable Unit, Used Medical Spare Parts

GE Voluson E8 Ultrasound System RFI Board KT1300614_4 - This is a circuit board component designed for the GE Voluson E8 Ultrasound Diagnostic System. It is one of the core electronic modules inside the device. It mainly covers functions such as RF signal management, imaging support, and system stability assurance.

It is a used product and has been tested to ensure that it is fully functional and meets the requirements of use. If you have any questions, you can contact us at any time for resolution.

GE Voluson E8 Ultrasound System takes 3D/4D volumetric imaging and high-definition blood flow imaging (HD-Flow) technology as its core advantages, and is widely used in the fields of fetal malformation screening, gynecological disease diagnosis and fallopian tube angiography. It can support three-dimensional intracavitary probes (such as RIC5-9-D) and matrix probes, and requires Coded Contrast Imaging and other optional software to realize the imaging function. It includes speckle noise suppression (SRI-III), spatial composite imaging (CrossXBeam), high-resolution magnification (HD-Zoom), etc., and relies on high-performance circuit boards to work together.

Common causes of failure:

• Dust accumulation: After long-term use, the dust filter may be clogged, which may lead to poor heat dissipation and cause overheating and damage to the board. It is recommended to clean the filter regularly (once a month), including vacuuming or rinsing with a neutral solution.
• Power supply fluctuation: Unstable voltage may burn out the onboard capacitors or fuses. Ensure good grounding and use voltage stabilization equipment.

Repair suggestions:

• Professional detection: If the device does not respond when it is turned on, you can test the power module output (such as ±12V, +5V, etc.) first, and then check the RFI board input port.
• Spare parts replacement: This board is a special component and must be purchased through GE authorized channels (model: KT1300614_4) to avoid compatibility issues.