Stryker 6208 System 6 Sagittal Saw for Intermittent Operation in Hospitals

Stryker 6208 System 6 Sagittal Saw

--- Brief Introduction of Stryker 6208 System 6 Sagittal Saw

The Stryker 6208 Sagittal Saw is a high-precision surgical instrument designed for orthopedic and trauma surgery, specifically for cutting bone. It

features an ergonomic design and advanced oscillating motion that provides surgeons with exceptional control and precision.

--- Features of Stryker 6208 System 6 Sagittal Saw

• Battery Lock – Press the battery lock to remove the battery from the handpiece.

• Battery – Rechargeable battery that powers the handpiece.

• Position Button – Press the position button to adjust the sagittal head.

• Blade Lock Lever – Rotate the lever to the “Load” or “Run” position to load or lock the blade.

• Blade Holder – The blade holder holds the blade in place.

• Sagittal Head – The sagittal head can be positioned in 45° increments and rotated 360° to set the desired cutting angle.

• Trigger Switch – The trigger switch is pressure sensitive and allows variable speed control.

• Fast/Standard/Safety Mode Control – Allows the handpiece to operate in Fast or Standard mode depending on the position. Safety Mode prevents operation of the handpiece.

• Accessory Interface – The connection provides power and communication for future accessories.

--- Safety Precautions:

• Allow the blade to cut while using the handpiece. Excessive force can bend the blade and reduce cut quality.

• Do not stop the handpiece. This could damage the motor or battery. If the handpiece jams, release the trigger immediately. Remove any obstructions before continuing.

• If a power outage occurs while using the handpiece, be sure to replace the battery with a fully charged one. Otherwise, the battery may be discharged or damaged, shortening its life.

• Slide the fAST/STD/Safe control to the fAST or STD position to operate the handpiece.

• Pull the pressure-sensitive trigger to operate at variable speed.

• When finished using the handpiece, slide the fAST/STD/Safe control to the safe position.

--- Specification of Stryker 6208 System 6 Sagittal Saw

--- FAQ:

1.What should I do if the accessory weight deviation is too large?

If the weight deviation exceeds the industry‑approved range, we will replace the accessory for you free of charge to ensure equipment balance.

2.Can we provide compatibility specifications for accessories and devices?

Yes. We can provide detailed compatibility specifications, including accessory parameters, compatible devices, test results, and other key information.

3.Is there an English version of the compatibility specification?

Yes. We provide bilingual (Chinese‑English) compatibility specifications for overseas customers to easily consult and use.

4.Are there any special tests for the compatibility of accessories for radiological medical equipment?

Yes. We conduct tests on the radiation protection performance and stability of the accessories to ensure compliance with the safety standards for the use of radiological equipment.

5.Does the accessory power compatible with my device?

Yes. Our accessory power matches the original accessory, ensuring perfect compatibility and preventing device failures caused by power incompatibility.

Thank you so much for your attention .If you're interested in Stryker 6208 System 6 Sagittal Saw For Hospital Repairing ,feel free to contact us .Thank you .

90 Day Warranty                             SGS ceryification