Edan F6 Fetal Monitor Printer Paper Tray With Roller Grey Color In Good Working Hospital Equipment

Edan F6 Fetal Monitor Printer Paper Tray With Roller Grey Color Used in Good Working Hospital Equipment

► Brief Description

The monitor has a built-in thermal recorder, supports US and international standard wideband recording paper, and can print continuous tracks and marks at the same time.
The monitor also supports the following functions:
1. Auto start printing: When this function is enabled, the recorder will automatically start printing when a new monitoring is started (press the START button). Otherwise, the PRINT button must be pressed to start printing.
2. Print timer: The print timer determines how long each print takes. This time is adjustable.
3. Remaining time display: The remaining time for printing is displayed in the status window unless the timer is set to "Infinity" or "Current ID".
4. Fast printing: The recorder prints the data stored in the monitor at high speed (up to 25mm/s).
5. Data cache: When the paper tray runs out of paper or the paper tray is opened, the recorder stops printing. From this point on, the data (up to 60 minutes) is temporarily stored in the internal memory. Stored data is printed at high speed when new paper is loaded and/or the drawer is closed. After printing the stored recording, the recorder automatically switches back and continues printing the current data at normal speed.
Note:
When the monitor is turned off, the data in the internal memory is lost.
6.FHR2 Offset: You can set the offset of the FHR2 track to separate the two FH tracks on the screen and the recorder paper. See 8.4.4 Changing FHR2/DFHR Offsets.
7. Print Self Test: When the monitor is turned on, the recorder prints a baseline for the self test.

► Specification

► Detailed Photos

► Safe to Use

1) This monitor is intended for use by qualified physicians or personnel with professional training. You should be familiar with the contents of this manual before operating the monitor.
2) Only qualified service technicians are permitted to install this equipment. Only service technicians authorized by the manufacturer are permitted to open the case.
3) This equipment is not intended for home use.
4) Explosion Hazard - Do not use the F6 monitor in a flammable environment as concentrations of flammable anesthetics or other substances may be elevated.
5) Electric Shock Hazard - Electrical outlets must be grounded three-wire outlets. Requires hospital-grade outlets. Never modify the monitor's three-prong plug to adapt it to a two-slot outlet. If the outlet has only two slots, be sure to replace it with a three-slot grounded outlet before attempting to operate the monitor.
6) Do not use this monitor and other ultrasound equipment on the same patient at the same time to avoid hazards caused by superimposed leakage currents.
7) Do not use this monitor and other patient-connected devices (e.g., pacemakers or other electrical) on the same patient at the same time.
8) Do not turn on the power until all cables are properly connected and checked.
9) Do not touch the signal input or output terminal and the patient at the same time.

Thank you for your interest in Edan F6 Fetal Monitor Printer Paper Tray With Roller Grey Color Used in Good Working Hospital Equipment, please feel free to contact me. Thank you for your time and wish you have a happy life.