Edan F6 Fetal Monitor 3-Prong Power Interface Assembly MS1-31007

►Quick Detail:

Thank you for your attention to our company's product, which is F6 Fetal Monitor 3-Prong Power Interface Assembly MS1-31007. The power is turned on through an electric control switch. Nowadays, power supplies are controlled by potential switches rather than mechanical switches. You need to find the pin that can activate the power supply from the troubleshooting wire hole of the power supply.

The production rate of this power component can reach 100%, and it is a standard 3U size, standard VPX power connector. Input voltage 18V-36V, 6-way output+12V,+5V,+3.3V,+3.3VAUX,+12VAUX, -12VAUX, maximum power 600W. This component consists of input filtering, DC/DC conversion circuit, control circuit, and output filtering circuit.

►Characteristic:

There are inductors on the power component board for storing energy, filtering and compensating for ripple voltage in the power supply, and capacitors for storing charge, filtering and compensating for ripple voltage in the power supply; Resistors: used to adjust voltage and current, voltage reduction, boost, and power attenuation, as well as diodes, transistors, MOSFETs, and transformers

Standard VITA62 control signal. It is used to turn off all output voltages except for+3.3V_AUX. It will be pulled down to SIGNAL-RETURN, VS1, VS2, VS3,+12V_AUX, and -12V_AUX will be turned off; High by default when not connected; When powered on, if ENABLE and INHIBIT are configured to turn on all outputs,+3.3V_AUX will be powered on 100ms before other outputs are powered on.

1. Support I2C communication;
2. Compliant with VITA62 standard;
3. Input undervoltage protection, output overvoltage protection, overcurrent protection;
4. It has software control function.

►Key features:

► Company situation:

The company has been professionally operating various brands of original medical monitoring instruments since 2015. The company has many professional senior engineers and has sufficient ability to undertake various medical equipment maintenance work. Covering motherboards, sensors, probes, modules, connectors, shells, etc. for various medical monitoring equipment.

►About delivery:

We default to express delivery by DHL,Fedex,etc.We will contact you as soon as possible when sending express delivery. If you have any questions after receiving the express delivery, please feel free to contact us at any time.