M4735-40003 Defibrillator Machine Parts PHiliph HeartStart XL M4735A Rotary Knob

▷ The PHiliphh HeartStart XL M4735A Defibrillator Rotary Knob M4735-40003 Brief Introduction

The PHiliphh HeartStart XL M4735A Defibrillator Rotary Knob M4735-40003 is a dial located on the front panel of the pacemaker. Use it to scroll through menu options and select settings such as power level, mode, and other parameters. You can scroll through the options. You can do this by turning the knob clockwise or counterclockwise. Then press the button to enter or confirm your selection. This user-friendly interface makes it easy for health professionals to use defibrillators in emergency situations. and adjust settings as desired

▷ Energy Select Knob Removal and Replacement

The following sections describe how to remove and replace the Energy Select Knob.

• Removal

Remove the Energy Select Knob.

Grasp the knob and pull straight out from the Front Bezel

TIP: The knob will be difficult to remove. To get a better grip on the knob, try wearing rubber gloves. If needed, use a pair of pliers with soft material over the jaws.

• Replacement

Replace the Energy Select Knob.

Push the knob onto the shaft. Be sure the knob is pressed fully into place. Check to be sure it rotates freely and that it points to the correct markings on the Bezel.

▷ About PHiliphh M4735A XL defibrillator

The M4735A is a biphasic, semi-automated external defibrillator. This portable, lightweight device offers two modes of operation for defibrillation:

Semi-Automatic External Defibrillation (AED) Mode

Manual Mode

In AED Mode, the M4735A analyzes the patient’s ECG and advises the clinician whether or not to deliver a shock. Defibrillation is performed through multifunction defib electrode pads.

In Manual Mode, the M4735A turns control of the defibrillation process over to the clinician. The clinician analyzes the patient’s ECG, decides if defibrillation is advised, and determines the energy setting for defibrillation. Defibrillation is performed either through multifunction defib electrode pads or through paddles.

Manual Mode also allows the clinician to perform synchronized cardioversion and offers optional noninvasive pacing (using a monophasic waveform). ECG monitoring can be accomplished in either mode using one of 3 methods:

• ECG from the defib pads.
• 3-lead ECG using separate monitoring electrodes.
• 4 Optional 5-lead ECG using separate monitoring electrodes.

Thank you so much for your attention .If you're interested in M4735-40003 PHiliphh HeartStart XL M4735A Defibrillator Rotary Knob ,feel free to contact us .Thank you .