Send Message
Tel:
China World Technology Medical Equipment Service Group
China World Technology Medical Equipment Service Group

China World Technology Medical Equipment Service Group

Win-win together!

Home ProductsUsed Ultrasound Transducer

Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00

Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00

  • Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
  • Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
  • Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
  • Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
  • Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00
Product Details:
Brand Name: Chison
Model Number: D3C60L
Payment & Shipping Terms:
Minimum Order Quantity: 1pcs
Packaging Details: Carton
Delivery Time: 3-5 working days
Payment Terms: T/T(wire transfer), Western Union, Paypal
Contact Now
Detailed Product Description
Product Name: Refurbished Chison D3C60L Ultrasound Probe 3.5MHZ PN 96-00127-00 Brand: Chison
Part No.: D3C60L Type: Convex Probe
Frequency: 3.5MHz Condition: Used
Warranty: 90 Days MOQ: One Piece
Delivery Time: 3-5 Working Days Delivery Method: DHL,UPS ,Fedex ,etc
Payment Terms: Full Before Shipment
High Light:

D3C60L Ultrasound Convex Probe

,

Ultrasound Convex Probe 3.5MHZ

,

Ultrasound Convex Probe PN 96-00127-00

Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00

 

 

Ultrasound probe maintenance is important because the better the condition of the probe, the better the results and the safer it is for the patient. Adequate care will also reduce disruptions, which means greater savings for facilities, more uptime for scans, and better quality of patient care. At Probo Medical we advise you on how to take care of your ultrasound probe, what to do with your probe when it comes to disinfecting and cleaning, and how to decide which disinfectants and cleaning products to use!

 

Maintenance of ultrasound transducers

An important part of the maintenance of ultrasound probes is cleaning and disinfection. Depending on the probe and application, there is a low and high level disinfection. Typically, standard surface transducers are cleaned or sterilized after each study. Any transducer that is inserted into a patient in any way must be highly sterilized after each exam.

 

Specification

Type Convex probe
frequency 223.5MHz

 

Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00 0

 

How to sterilize your ultrasound probe

Follow package directions when using low-level disinfectant cleaners. Or how to train infection control staff on proper use.

 

All transducers inserted into the patient such as TEE, EV, ER, surgical etc. must be sterilized to a high level after each use. It is more important to use manufacturer-approved reagents as these chemicals are more aggressive and can damage the transducer more quickly.

 

High level disinfection is achieved by immersing the transducer in liquid reagents or using the Trophon system. For any disinfection, especially high-level disinfection, the transducer must not be immersed deeper than specified. Prolonged exposure to chemicals can shorten the life of all transducer types.

 

What to do with your ultrasound probe?

Handling and maintenance rules applicable to all converters:

 

  • Keep the transducer clean when not in use
  • The transducer is properly protected when not in use
  • Do not drop the transducer
  • Be careful not to hit anything hard with the front end of the transducer

Very important when transporting from room to room

Sensors stored in drawers often touch the bottom of the drawer. This should be covered with moss or something soft.

  • Keep the cable straight and free from filters
  • Always use an approved cleaning/disinfecting method
  • TEE transducers must be shipped in rigid cases with array tip protectors

 

Common mistakes in converter maintenance

  • Shrink sensor cable

If this is not corrected, it forms a memory and does not recover. If this is the case, the transducer may require new cables and may cause image quality issues.

 

  • Bad security

A dangerous example is connecting to a device while immersed in Cidex. If the transducer has holes, it can be damaged. Scenarios like this can lead to an almost infinite number of bad things. If the sensor wobbles due to system movements, Cidex will also splash everywhere.

 

  • Improper storage

An example of improper storage is leaving the transducer in the sink after rinsing with Cidex. Hitting the side of the sink will damage the transducer array. To do this, press the handle and slide the transducer forward. It's a perfect example of how an unusual event can lead to expensive repairs.

 

  • Missing funnel to connect the sensor to the Cidex

If this is the case, it means that the transducer is resting on the nose (matrix). This means that the transducer comes very close to being damaged. The damage can only be reduced by a few centimetres.

 

  • The probe membrane is full of holes and looks like a sponge

A spongy film is likely the result of using an unapproved cleaning product.

 

If you're interested in Refurbished Chison D3C60L Ultrasound Convex Probe 3.5MHZ PN 96-00127-00,feel free to contact us .Thank you .

Contact Details
China World Technology Medical Equipment Service Group

Contact Person: Kiara

Tel: 8619854815217

Send your inquiry directly to us
Other Products
China World Technology Medical Equipment Service Group
TianHe District,GuangZhou,GuangDong
Tel:86-198-5481-5217
Mobile Site Privacy Policy | China Good Quality Used Patient Monitor Supplier. © 2021 - 2024 patients-monitor.com. All Rights Reserved.