China World Technology Medical Equipment Service Group
Win-win together!
 |
| Brand Name: | GE |
| Model Number: | 801394-001 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | Carton |
| Delivery Time: | 3-5 working days |
| Payment Terms: | T/T(wire transfer), Western Union, Paypal |
| Product Name: | P/N 801394-001 GE Dash3000 Dash4000 Dash5000 Patient Monitor Power Supply Board | Brand: | GE |
|---|---|---|---|
| Part No: | 801394-001 | Condition: | Used |
| Warranty: | 90 Days | Packaging: | Carton |
| MOQ: | One Piece | Delivery Time: | 3-5 Working Days |
| Delivery Method: | DHL,UPS ,Fedex | Payment Terms: | Full Before Shipment |
| Payment Method: | T/T ,Paypal , Western Union | Compatible Model: | Dash3000 Dash4000 Dash5000 |
| High Light: | Patient Monitor Power Supply Board,P/N 801394-001 Power Supply Board,Dash4000 Power Supply Board |
||
P/N 801394-001 GE Dash3000 Dash4000 Dash5000 Patient Monitor Power Supply Board
The monitor subsystems operate on a common 9 to 18 V power bus. Due to the wide variety of voltages required by the different subsystems, each subsystem converts power locally. This architecture provides efficient and compact systems by reducing the number of conversions required and optimizing the Philipilipysical size of each converter for specific applications.
When operating on AC mains, the power bus voltage is 18V, which is generated by an off-line switching power supply.
There is no power switch.
The line voltage range switch must be set to 115 V or 230 V (90 to 132 VAC or 190 to 264 VAC).
Features :
1.High quality power supply
2.durable
3.easy to repair
4.compact design
Specifications
Input specifications
| Voltage range | ± 0.5 mV to ± 5 mV |
| Signal width | 40 ms to 120 ms (Q to S) |
| Heart rate range | 30 to 300 bpm |
| Input impedance | Common mode > 10 MΩ at 50/60 Hz Differential > 2.5 MΩ from dc to 60 Hz Common mode rejection 90 dB minimum at 50 or 60 Hz |
Output specifications
| Impulse response | For an impulse of 3 mV applied for 100 ms Displacement following impulse < 0.1 mV Slope following impulse < 0.3 mV/s |
| Frequency response | Response of non-permanent displays is limited by resolution to 40 Hz (-3 dB) @25 mm/s. Specified upper frequency limits may vary by ± 2 Hz. |
| Diagnostic mode | 0.67 Hz (+0.4 dB) to 100 Hz (-3 dB) |
| For compliance with China National Standard | 1.0 Hz (+0.4dB) to 75 Hz (-3 dB) |
| Monitoring mode | 0.67 (+0.4 dB) to 40 Hz (-3 dB) |
| Moderate mode | 0.67 (+0.4 dB) to 25 Hz (-3 dB) |
| Maximum mode | 5.0 Hz (-0.3 dB) to 25 Hz (-3 dB) |
| Noise | < 30 µV (referred to input) |
Replace power supply assemble
1. Remove the CPU and battery compartment assembly.
2. While supporting the power supply with one hand, remove the four screws on the back of the device.
3. Remove the drive assembly.
4. Align the tabs on the power supply mounting bracket with the slots on the back of the case and install the new components into the device. Secure the assembly to the back box with new screws.
NOTE: When installing the thumb screws on the recorder, tighten them with your fingers first. Then use a screwdriver to tighten the screw an additional 1/4 turn.
5. Reassemble the patient monitor in reverse order.
FAQ:
1. Can you give me your price list?
At the moment we don't have a price list as the stock changes every day. We would appreciate checking our website and posting pictures for pricing.
2. Can I order a sample first?
Of course, our MOQ is one piece.
3. How can I place an order?
Contact us to confirm your order details, once confirmed, a proforma invoice will be sent and shipping will be arranged upon receipt of full payment
4. How long is the warranty period?
Our warranty period is 90 days. If you have any after-sales problems, please contact us and get a replacement.
If you're interested in P/N 801394-001 GE Dash3000 Dash4000 Dash5000 Patient Monitor Power Supply Board ,feel free to contact us .Thank you .
Contact Person: Andy
Tel: 8619854815217
