Mindray Beneheart D1 D2 D3 D5 D6 defibrillator Multifunction Electrode Pads MR62 Lot 190227-4017 PN 115-035426-00
► Brief Introduction
AED Action
Make sure you don't respond, breathe or not breathe normally. then:
1. Press the on/off button to turn the device on.
When the device enters AED mode, it checks to see if the pads and cable adhesives are properly connected.
2. Exposing the patient's chest. Wipe moisture from the patient's chest and, if necessary, cut or shave excess chest hair.
3. Place multifunctional electrod cushions on the patient as directed on the adhesive package.
4. Follow the screen and voice claims.
- If a shockable rhythm is detected, the device will be charged automatically.
- If a shockable rhythm is not detected, the system demands "no shock" and then CPR begins or resumes rhythm analysis according to the current [NSA procedure] setting.
5. Press the shock button, if asked.
Make sure no one touches the patient, bed or any device connected to the patient. She calls clearly and loudly "Stay clear." Then press the shock button on the front panel to shock the patient.
The shock is confirmed by the sound wave and the "Shock Delivered" screen and the shock counter is updated on the screen to reflect the number of shocks provided. If the [shock chain] consists of more than one, the device resumes analysis of the patient's rhythm after directing the shock to see if the trauma is successful or not. Voice and text claims continue to guide you through additional shocks.
► Key Features
Pre-applied gel, pre-connected cables, and integrated self-adhesive make it convenient to set up
Designed with a 2.05m long lead wire for extended range during use
Supports Auto ID validity check when used with BeneHeart D1 and C-Series
Compatible with BeneHeart D1 D2 D3 D5 D6, and C-Series
► Mindray Multifunction Electrode Pads MR62 PN 115-035426-00 Guide
| Key Features |
Disposable, pre-gelled, self-adhesive, single use, non sterile |
| Function |
ECG monitoring, defibrillation, cardioversion, external pacing |
| MDD Classification |
Class Iib |
| Auto-identification for Adult or Pediatric pads |
When be used with BeneheartD1:Yes
When be used with BeneheartD3/D6:No |
| Auto-identification for pads validity |
When be used with BeneheartD1:Yes
When be used with BeneheartD3/D6:No |
| Auto-identification for pads connection with main unit |
When be used with BeneheartD1:Yes
When be used with BeneheartD3/D6:No |
| Designed for adult/child |
>25 kg |
| Active Surface Area |
82 cm² per electrode |
| Approx. lead wire length |
1m preconnectable (0.25m cable out-of- pouch) |
| Max. monitoring |
24 hrs. |
| Max. defibrillation shocks |
50 shocks (@360J) |
| Max. duration of pacing |
1 hour at 140mA/120ppm (pulse duration 20ms) |
| Storage Conditions |
between 0 and 50 °C |
| Extreme Storage Conditions |
max. 10 days between -40 and 75 °C |
| Shelf life from date of |
36 months |
| Compatible with device |
Mindray Beneheart D1 D2 D3 D5 D6 defibrillator |
► Connecting Electrode Pads
1. Plug the pads connector into the pads socket.
2. Place the pads package into the pads compartment properly and carefully.
NOTE
Make sure the pads package is intact before use. Otherwise, replace it with a new one.
► AED Mode
| Output energy: |
User configurable |
| AED shock series: |
Energy level for adult: 100 to 360 J, configurable
Energy level for pediatric: 10 to 100 J, configurable
Shock series: 1, 2, 3, configurable
Default con guration meets 2015 AHA/ERC Guidelines |
| Energy Default: |
200J, 300J, 360J(Adult); 50J, 70J, 100J(Pediatric) |
| Quick shock: |
Typically analyzes and charges in <8 seconds from the end of “Stop CPR” prompt |
Please kindly contact us, if you are interested in Mindray Beneheart D1 D2 D3 D5 D6 defibrillator Multifunction Electrode Pads MR62 Lot 190227-4017 PN 115-035426-00, Thank you!
Your message must be between 20-3,000 characters!
