M3016A Philipilip Mainstream CO2 MMS Module

M3016A Measurement Server Expansion Working Principle

The specific application software for measuring the second pressure/temperature and CO2 runs on the main CPU of the measurement server. The pressure/temperature and CO2 front-end transmits the pre-processed Philipilipysiological data to the application-specific software on the main CPU of the measurement server through the front-end link protocol. The temperature/pressure functions available on the extension are the same as those available on the server. The temperature/pressure options specific to the extension are T2 and P2. If you press the zero key on the server, all invasive pressure channels used will be zeroed. However, to set a separate zero-sum label for P2, use the soft keys on the monitor. If two temperatures are measured (one using the server and one using the extension), the server calculates the temperature difference (Delta Temp)

M3016A MeasurementServer extended hardware function description

The extension receives information signals (such as Temp/Press and mainstream CO2, and then the patient transmits the data to the monitor through the server-to-monitor link bar.

The mainstream CO2 extension is always used with the server. To function properly, both the server and the extension must have compatible software revisions.

Warning

Do not use measurement extensions with measurement servers that include version A software (A.XX.XX). Due to the lack of the software required to process the data from the extension, no additional measurements will be displayed. To check the software version, press the settings key and select the version.

Pairing servers with extensions can achieve the following goals:

• Measure the body temperature and invasive blood pressure of the same patient.

• Two temperature measurements of the same patient, including Delta Temp calculation function.

• Perform two invasive blood pressure measurements on the same patient.

Mainstream CO2 Measurement

The M3016A measurement server extension has mainstream carbon dioxide breathing gas measurement for Monitor monitoring equipment. It is intended to be used with the M3000A measurement server for adult, pediatric or neonatal patients, in the hospital environment, and during clinical users transporting patients inside and outside the hospital

CO2 breathing gas measurement indicates the efficiency of oxygen transfer from alveolar air to pulmonary capillary blood, and the efficiency of removing carbon dioxide from pulmonary capillary blood and transferring it to alveolar air.

CO2 breathing gas measurements are evaluated as the gas passes through the airway adapter on the patient’s intubation system

The CO2 breathing gas measurement value indicates the patient's overall breathing status.

The important concept of blood gas is

Airway Respiration Rate (AwRR)-the number of inhalations and exhalations per minute

End-tidal CO2 (ETCO2) The highest CO2 partial pressure measured during an exhalation

Minimum CO2 during inhalation Minimum CO2 partial pressure

Instantaneous CO2-the measured value of Co2 at any moment.

Ventilation-the movement of air in and out of the lungs through inhalation and exhalation.

Mainstream CO2 Features

This figure shows the user controls and mainstream connectors on the server

Mainstream CO2 Wave

The two calibration marks are located at 10% and 60% of the channel height. The lower calibration mark is marked with 0 mmHg (0.0 kPa) on all scales. The previous one can be adjusted from 20 mmHg (2kPa) to 100 mmHg (13 kPa) in steps of 10 mmHg (1kPa)

M3016A can be easily used with the following patient monitor series

• Philipilip MP20 patient monitor
• Philipilip MP30 patient monitor
• Philipilip MP40 patient monitor
• Philipilip MP50 patient monitor
• Philipilip MP60 patient monitor
• Philipilip MP70 patient monitor
• Philipilip MP80 patient monitor
• Philipilip MP90 patient monitor

M3016A #A02 (Press/Temp without Mainstream CO

Overview of the Measurement Server Extensions M3015A &

M3016A

Measurement Connectors for the M3016A Measurement Server

Extension