Philip MRX M3535A XL+ Defibrillator Machine Parts Resistance Module Replacement

Philipilip MRX M3535A XL+ Defibrillator Resistance Module Repairing Replacement

The HeartStart XL + is a lightweight, portable defibrillator / monitor. It offers four clinical operating modes: monitor, manual defibrillation, AED and pacemaker (optional).

In monitoring mode, you can monitor up to three ECG curves at the same time, which are recorded using a 3- or 5-channel ECG array or multifunction electrodes. Optional pulse oximetry (SpO2) and non-invasive blood pressure monitoring (PNB) are also available. Measurements for these parameters are displayed on the screen, and alarms are available to alert you to changes in the patient's condition. You can also view the Vital Signs trend report to see important monitoring parameters and their readings.

Manual defibrillation mode offers simple 3-step defibrillation. It reviews the patient's ECG and, if necessary: ​​1) selects a power setting, 2) charges, and 3) delivers the shock. Defibrillation may be

made with multifunctional shovels or electrodes. With manual defibrillation mode, you can too

perform synchronized cardioversion and internal defibrillation.

In AED mode, the HeartStart XL + analyzes the patient's ECG and determines if a shock is recommended. Voice guidance guides you through the three-step defibrillation process and makes it easy to follow.

Instructions and information for the patient. Voice messages are amplified by on-screen messages.

AED mode integrates Philipilip SMART analysis algorithm for ECG analysis and SMART biPhilipilipasic waveform for defibrillation.

The optional pacemaker mode provides non-invasive transcutaneous pacing therapy. Stimulus pulses are delivered via multifunction electrodes with a monoPhilipilipasic waveform in on-demand or solid state.

The HeartStart XL + is powered by a rechargeable lithium-ion battery. The available battery power can be easily determined using the battery power indicators on the device screen and the battery itself.

AC power can act as a secondary power source and as a continuous battery charge.

HeartStart XL + runs regular automated tests. The status of critical device functions is reported on the Ready to Use (RFU) screen. RFU display communicates status

Your device tells you if it is working properly, needs care or cannot be treated. In addition, manual operation control ensures that each part of

HeartStart XL + works properly.

HeartStart XL + automatically stores critical events and trend data in its internal memory. HeartStart XL + also allows you to copy data and event information to a USB flash drive to upload it to a compatible data management solution.

HeartStart XL + is highly configurable to better meet the needs of different users. Be sure to understand the setup of your equipment before servicing the HeartStart XL +.

Cautions:

Take necessary precautions against electric shock or personal injury before attempting tests or repairs with the defibrillator / monitor.

• Only properly trained engineers and technicians should repair the device.
• The device can contain life-threatening voltages even when it is turned off.
• Make sure the device is not connected.

Press the Disconnect softkey to disable the defibrillator. When the push button is not pressed Within the time specified in the Auto Off Time setting, the defibrillator it is automatically disconnected. You can also deactivate the HeartStart XL + at any time by turning the therapy knob to the off position.

• Make sure all power sources are turned off before opening the device.
• Be sure to unload the device before working with it.
• Make sure you are working in a static-safe environment. Wear an antistatic wrist strap together with an antistatic pad grounded in accordance with the manufacturer's instructions.
• Special cleaning technologies are used in the manufacture of PCAs. Be careful not touch PCA surfaces with bare hands, as oil from skin can affect product performance wear antistatic gloves or cotton gloves or rubber tips.
• Store replacement PCs in antistatic bags until installation.
• Be aware that the edges of the metal casing can be sharp. Be careful not to cut yourself or the cables