Nihon Kohden Cardiolife Defibrillator TEC-7621K TEC-7621C New Condition

TEC-7621K TEC-7621C NIHON KOHDEN Cardiolife Defibrillator New Condition

Nihon Kohden TEC-7621K has a 5.7-inch large screen, color TFT LCD display, integrates defibrillation and monitoring.

Optional "AED" automatic external defibrillation function, and optional AED voice prompts.

Multi-parameter monitoring function, in addition to ECG and heart rate monitoring, SPO2, CO2 plug-in and NIBP plug-in can be purchased to realize multi-parameter monitoring and increase the usable range of the machine.

Defibrillation type: manual, synchronous, AED

Output energy (50Ω in parallel):

TEC-7621C: 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300 and 360 Joules

Energy accuracy:

2 joules: ±0.5 joules

3 joules: ±1 joule

5 to 15 joules: ±2 joules

20 to 360 joules (TEC-7621C): ±10%

Energy limitation: 50 joules of internal defibrillation

Output waveform:

TEC-7621C: Edmark, single pulse wave (parallel 50Ω)

Charging time:

TEC-7621C:

AC work: 0 to 360 joules, 5 seconds longer

AC work: 0 to 200 joules, 3 seconds

After the new battery is fully charged, when the outside temperature is 20 degrees Celsius: 0 to 270/360 Joules, 10 seconds longer

Charging display: display the charged energy value

Charging status indicator: sound after fully charged

Synchronous discharge: provided

Discharge time:

From the top of the R wave to the top of the discharge wave:

Use the ECG lead wire to detect the ECG or the electrode plate to detect the ECG: within 60ms

Use external input ECG signal: within 25ms

Large continuous cycle of charging and discharging at 270/360 Joules:

60 times: 3 times per minute, need to stop and rest for 1 minute every 1 minute of work

15 times: 3 times per minute, no rest period required

Discharge test: When 2 to 270/360 joules pass the test load, the "test normal" message will be displayed. When the selected energy fails to pass the test load, "Test Failed" is displayed.

Automatic internal discharge: The energy stored in the machine can realize automatic internal discharge under the following conditions:

1) The energy knob is turned to the discharge position

2) The power is turned off

3) The electrode plate is pulled out

4) Exceed the preset time after charging

5) The disposable electrode placed on the patient is removed

Electrode plate size:

Adult: 76X106mm

Children: 46X54mm

Length of electrode plate connection: 2.0m or longer

Electrode connection impedance:

Indicated by 3 indicator lights of different colors on the electrode plate handle

Green light: 0 to 100Ω

Yellow light: 100 to 200Ω

Orange light: greater than 100Ω

u Guardianship

Display: 5.7 inches, color LCD

Effective display range: 115X86mm

Number of stitches: 1 (ECG), or 3 (ECG, pulse*, end-tidal carbon dioxide*)

Use optional DSI access unit

Scan length: 97mm

Scanning speed: 25 or 50 mm/s (cardiograPhilipilip, pulse wave), 6.25 or 1.2550 mm/s (end tidal carbon dioxide)

Amplitude limit: 40 mm

Baseline position: fixed

Letter and number display: heart rate, blood oxygen saturation value*, pulse rate*, end-tidal carbon dioxide value*, number of breaths*, non-invasive blood pressure value** (systolic blood pressure, diastolic blood pressure, mean blood pressure)

Use optional DSI access unit

Use the optional non-invasive blood pressure unit

Other indications: synchronization, charging, discharging, fixed mode, demand mode, ~ (AC working), battery mark (indicating remaining working time), information

Alarm system:

Heart rate/pulse rate upper/lower limit (in steps of 5 beats per second)

Upper limit: 20 to 300 times per second, closed

Lower limit: 15 to 295 times per second, off

Upper/lower limit of blood oxygen saturation (in 1% steps)

Upper limit: 51 to, closed

Lower limit: 50 to 99%, closed

Pulse rate upper/lower limit (in steps of 5 beats per second)