China World Technology Medical Equipment Service Group
Win-win together!
EnviteC Oxygen Sensor OOM102-1
Technical Specifications Oxygen Sensor OOM102-1
| Measurement range： | % ... 100 % oxygen (at atmospheric pressure) |
| Nominal sensor lifetime： | ≥ 1 000 000 % volume oxygen hours |
| Output in ambient air： | 9 mV ... 14 mV |
| Electrical interface： | 3.5 mm mono phone Jack |
| Accuracy： | meets ISO 80601-2-55 requirements |
| Repeatability： | < 1 % volume O2 at constant temperature and pressure |
| Linearity error: | < 3 % relative |
| Response time： | < 12 s to 90 % of final value |
| Zero offset voltage： | < 200 µV in 100 % nitrogen, applied for 5 min |
| Cross interference: | meets ISO 80601-2-55 requirements |
| Influence of humidity: | -0.03 % rel. per % RH at 25 °C |
| Pressure range: | 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2) |
| Influence of pressure: | proportional to change in oxygen partial pressure |
| Influence of mechanical shock: | < 1 % relative after a fall from 1 m |
| Operating temperature: | 0 °C ... +50 °C |
| Temperature compensation: | built-in NTC compensation |
| Operating humidity: | 0 % ... 99 % RH non-condensing |
| Storage temperature: | -20 °C ... +50 °C |
| Recommended storage: | +5 °C … +15 °C |
| Recommended load： | ≥ 10 kOhms |
| Warm-up time： | < 30 minutes, after replacement of sensor |
| Weight： | approximately 28 grams |
| Long term output drift： | < 1 % volume oxygen per month |
| typically < -15 % relative over lifetime | |
| Effect of temperature compensation (steady state)： | between +25 °C and +40 °C: 3 % relative error |
| between 0 °C and +50 °C: 8 % relative error |
Contact Person: Miss. Kiara
Tel: 8619854815217
Fax: 86-198-5481-5217
